Forum menu
Topic starter
I've been trying to tune my road bike a bit over the weekend and found it wasn't cleanly getting into the biggest cog on the back. I tweaked the limit screw a bit and now it's fine but I've found out that it's jumping past the next cog so I effectively have a 9-speed setup.
The mech, chain, shifter and cassette are all new (latest shimano 105) and no amount of messing seems to fix the problem. Anyone have any ideas?
Posted : 23/07/2012 2:15 pm
[img] 
[/img]
never fails! 😉
Posted : 23/07/2012 2:26 pm
take up some tension in the cable..
Posted : 23/07/2012 2:43 pm
Less tension shirley?
Posted : 23/07/2012 2:45 pm
Mech hanger?
Posted : 23/07/2012 3:28 pm
Topic starter
Hanger fine. Hits every other gear fine, just skips the one next to the biggest
Posted : 23/07/2012 9:03 pm
Change the cable outer where it curves round to the derailleur, you'll be amazed at the deterioration in performance you've come to accept as normal.
Posted : 23/07/2012 9:13 pm