Forum menu
Topic starter
Gone from a single (out the box bike) 36 chain ring to a 32, on a standard 11/36 cassette, how many links should I remove? Rear mech is folded flat when in 10th. Thanks
Posted : 01/05/2015 8:19 pm
If it was good before, then one link (one fat bit + one thin bit) - 2 teeth's worth of chain to correspond to the 2 fewer teeth the chain has to go round.
Posted : 01/05/2015 8:26 pm
Topic starter
Would it not be 4 fewer teeth as I've gone from 36 to 32 up front?
Posted : 01/05/2015 8:38 pm
Chain only uses half the teeth at any one time
Posted : 01/05/2015 8:45 pm
^ it's now going round 16 teeth not 18
Posted : 01/05/2015 8:53 pm
Just size it up on the usual manner. There isn't a set rule for chain length/chainring size.
Posted : 01/05/2015 9:08 pm