Forum search & shortcuts

Orange Five noisy s...
 

[Closed] Orange Five noisy swingarm (as in noisier than normal)

Posts: 0
Free Member
Topic starter
 
[#5498085]

Hi all,

I was riding some downhill at Aston Hill when the swingarm started making this disconcerting clunking noise over the rough stuff. I thought it also seemed to moving laterally more than usual.

First thought was bearings. So after a massive hassle getting them swapped over, involving a plasma cutter among other inappropriate tools, they have been replaced.

Went for a ride today, and the hollow clunking noise is still there 👿

Brake caliper is tight on, shock bolts are fine, as are bushes, so not too sure what it could be.

I also have replaced the dropout.

Can't really think what it can be, I'd like to think it's just a standard Orange noise, but I don't remember it being present before.

The noise is only present when I'm riding over roots and small rocks, not when I stand on the pedals and jump up and down to compress the shock.

Many thanks!


 
Posted : 08/09/2013 9:12 pm
Posts: 469
Free Member
 

Gear cable slapping around inside swingarm I'd wager


 
Posted : 08/09/2013 9:25 pm
Posts: 1447
Full Member
 

Rear mech hitting of the swing arm?


 
Posted : 08/09/2013 9:26 pm
Posts: 1199
Full Member
 

rear hub?


 
Posted : 08/09/2013 9:27 pm
Posts: 0
Free Member
Topic starter
 

Gear cable slapping around inside swingarm I'd wager

Possible, but I can't see how that can make such a clunky noise - I'll check it out.

Rear mech hitting of the swing arm?

Is that even possible?

rear hub?

I'll have a look, any idea how I can check for this?


 
Posted : 08/09/2013 9:34 pm
Posts: 1199
Full Member
 

to check the rear hub... grab hold of wheel and shake violently from side to side. If you have any sign of play, you have a problem.


 
Posted : 08/09/2013 9:41 pm
Posts: 0
Free Member
 

I had this last week - it was a snapped rear hub axle. I figured it out when I took the back wheel off to fix a puncture and the cassette fell off.


 
Posted : 08/09/2013 9:44 pm
Posts: 0
Free Member
Topic starter
 

Thanks for the help. I'll give the rear end a purge tomorrow!


 
Posted : 08/09/2013 9:46 pm
Posts: 0
Free Member
 

It could be your axle , if its not tight enough a creeking sound can be heard that is amplified through the swing arm as it is a large box section . Put a bit of copper grease on the lugs and tighten the q realise or through axle , it works on mine 🙂


 
Posted : 09/09/2013 12:56 pm
Posts: 0
Free Member
Topic starter
 

It could be your axle , if its not tight enough a creeking sound can be heard that is amplified through the swing arm as it is a large box section . Put a bit of copper grease on the lugs and tighten the q realise or through axle , it works on mine

Will do that presently 🙂


 
Posted : 09/09/2013 1:15 pm