Topic starter
Hi
Searched the internet and can’t find any recommended torque settings for the bolts on a nukeproof zero stem.
Any ideas
Thanks
Kev
Posted : 25/12/2017 6:36 pm
5nm probably TIJAGT
Posted : 25/12/2017 7:29 pm
Somewhere past loose but well before red face tight.
But about 5NM as mentioned above is a fairly standard stem torque setting.
Posted : 25/12/2017 8:11 pm
Topic starter
Thanks for the replies, I’ll try 5Nm see how it goes
Posted : 25/12/2017 8:35 pm