[Closed] New toy - Cotic BFe

A 26er? Are you mad?

**like**

I have a Gen 1 ...
In the undercoat grey colour

Fantastsic bikes - I like it better than the soul

SWEET build!

Luvrrly!

Glad to see it all built up again, looks like a bit of a monster, I hope you have fun on it!

Bigmantrials - Member

Glad to see it all built up again, looks like a bit of a monster, I hope you have fun on it!

Thanks Adam, was an absolute pleasure dealing with you, I hope you enjoy your new toy when it arrives!

Very nice.

[STW KNOB] Your forks are too long you need 100mm any more is pointless[/STW KNOB]

Looks great. I love the green colour on the new ones.

I've got an XS 'classic' BFe built up as play bike and it's an absolute hoot. It's teeny but us just used to get thrown off jumps and down short DH runs in the local woods.

I_Ache - Member

[STW KNOB] Your forks are too long you need 100mm any more is pointless[/STW KNOB]

I shall go and indulge in a session of self flagellation to atone for such a hideous crime!

Jebus - I'm 6'1" and rode a large Blur 4x for ages, and it was too small. Dunno how you managed on a medium.

I thought that 130mm was the sweet spot on the BFe? That's what the geometry is based around on the website. Mine feels pretty spot on with 130mm forks but I like long travel hardtails.

You did well to last that long with a medium SC what with their penchant for pigmy top tubes.

Garden looks immaculate.

Garage needs a bit of work. Very cluttered.

Replace big ring with a bash ring and add a dropper post!

Oh and mismatched tyres...tut tut!

Looks a hot though!

To be honest I ride my BFe at 140mm most of the time, when messing around on jumps I wind the forks down to 100. It still rides trails fine at 100 but is a little on the steep side when you forget and throw it down some roots. I was going to try mine with my lyriks for a giggle but couldn't be bothered to mess around with the brakes.

honourablegeorge - Member

Jebus - I'm 6'1" and rode a large Blur 4x for ages, and it was too small. Dunno how you managed on a medium.

Frequent bruised knees and a stubborn streak 3 feet wide!

mindmap3 - Member

I thought that 130mm was the sweet spot on the BFe? That's what the geometry is based around on the website. Mine feels pretty spot on with 130mm forks but I like long travel hardtails.

I had the 36's already, if it rides like a pig I've got a set of 32 TALAS in the garage.

Freester - Member

Garden looks immaculate.

Garage needs a bit of work. Very cluttered.

I'll have you know that it is organised chaos! Did have a good tidy up on Monday night after I'd finished the bike, the motorbike lives in the middle and I treat all the walls as storage space, it's a proper little man cave!

BillOddie - Member

Replace big ring with a bash ring and add a dropper post!

I have a bash, will see how much use the big ring gets first. I lent my Reverb to a friend who is dropper curious at the weekend for him to try out. I'm walking in Wales with MrsMomo this coming weekend so will get it back from him after that.

Thanks for all the positive comments anyway 😉

i ride 160's on my new bfe.
great going up and awwwwwwwwesome goin' down.

Is the blur for sale?

flange - Member

Is the blur for sale?

Yes, or it will be shortly anyway once I'm sure about the BFe.

Looks fun. The kind of bike you injure yourself on (in a good way!).

Looks dire with those forks on, stick your 32's on it for FFS.

I like it with the 36's. Anyway, based in what most peope on here say about 32's you couldn't possibly use them because they're flexy noodles of forks that will result in certain death 😀

I agree with dragon. You don't want to be putting strong heavy hitting forks on a strong heavy hitting frame.

You should be putting noodly stretched out XC forks on a BFe just like you would on a Soul. 🙄

Apart from saving you all the time/money of a new frame, what else would putting a longer stem on the SC in the first place have done?

Given the fact that the OP is over six foot he would have needed a retro tiller to get a good reach with the traditional SC pigmy top tube. I love SC bikes but their insistence on short top tubes (until the newer bikes like the Bronson) does my head in.

I agree with I_Ache tough forks have no place in a tough frame designed to be ridden like a hooligan.

The stem on the BFe has virtually no outreach.
A 110/120/130mm stem never killed anyone. And they only cost £10-20.

That's n-i-ce ....

First thing I was going to suggest was cabletie-ing the chain stay protector as it moves about but I see you have the self-algamating tape on.

Next I have 150/120 switchable Secktors on my BFe (prior model), I think the bike will ride fine with those Fox's - if I'm not mistaken they are the 150 Talas from circa 2006, I have those forks on another bike and I think the BFe will go well with them. It just loves to be ridden and to play, you'll be seeking out anything to pop off or a bit of trail you can hammer down. If you were looking for the "perfect fork" for the bike you might choose something else but we all rarely get the chance to do that for every component.

The stem on the BFe has virtually no outreach.
A 110/120/130mm stem never killed anyone. And they only cost £10-20.

The bike has Disc Brakes on it too, surely that's pointless overkill?

Glad to see the resident old school troll has made a return for some japes and much hilarity! 😉

The forks are 160mm van rc2s, and they're most definitely staying where they are, just come back in from a quick 11 mile local loop and wow what a bike! It's going to take me a few rides to re-adjust to a hardtail.

I am one happy Momo, looking forward to getting out again tomorrow night now.

I say again, lurrvly!

looks sweeeeet! Was absolutely certain i wanted the orange until i saw that green again!

Can i just ask - whats the idea with the self-algamating tape? Is it better than the 'normal' protector you buy?

Very nice.

I've got the previous genration blue frame with a similar setup with that chain device from your first picture and a double and bash XT crank setup to keep things happy over the rough stuff.

I've also got huge tyres and ridiculously wide bars - one mate called it a 'clown bike' after having a go, but I love it dearly.

*** Tip - put some of that tape on the other chainstay as the brake disc tends to scratch the inside of the frame when you take the back wheel off.

It's the forks'n'stem that make it such a sweet build. Looks like a hoot!

phatstanley - Member
i ride 160's on my new bfe. great going up

you would say that, i suspect its more just ok having ridden a soul with 130mm travel

all these folk that shout over biked at anything that isn't a rigid single speed are a supercilious bunch of ****ers, just because you can't ride a bike hard enough to use more than 80mm of travel doesn't mean other riders can't 🙄

presuming you not talking about me? if so, id read it again 8)

I think the chap above has a good point re. Putting a 130mm stem on the 4x it is a very good idea. Having your weight over or beyond the front axle will really help with steep descents, you will have a much better chance of keeping the front on the ground and with the extra leverage the steering will be loads more precise over rocky stuff. I don't think getting stucco in ruts will be an issue either as you will easily be able to turn out of it.

all these folk that shout over biked at anything that isn't a rigid single speed are a supercilious bunch of ****, just because you can't ride a bike hard enough to use more than 80mm of travel doesn't mean other riders can't

I remember when 80 mm was badged as long travel !!

mrmoofo - Member

I remember when 80 mm was badged as long travel !!

So do I! My first suspension forks were marzochi xc51's! A whole 2" of travel!