You can start by building a road singlespeed frame that takes 130mm OLN wheels so us roadies can pop in old wheels rather than buy the 120mm stuff that's out there.
You can get tubes direct from Reynolds.
But to visualise and understand the dimensions of the butts the American distriutor has some pictures
http://www.fairing.com/Reynolds.asp?subcat=reynolds&subreynolds=853
see also the Privateer article on bespoke frame builders.
Hi Simonscycles,
I recently found this interesing article/seminar by Carl Stron (Strong frames) on the Frame Builders Collective website called 'the buisness of professional framebuilding' which might be of interest:
enjoy!
Its already been said but you do need a USP.
A few Ideas:
Internally routed cables and Hydro lines. (Not unique) if done well incling brake lines could look very cool. How about the front brake line inside the fork leg? rigid obviously, BMX style. Im sure it could be done.
Intigrated seat post (again not unique) design a saddle clamp thats integrated, will mean made to measure but not a problem on a bespoke frame and people love things made just for them.
Smooth welds and oversized or undersized tubes.
Im sure other people have much better ideas but I really believe with a bit of thought and good design you could be onto a real winner.
I would certainly buy one with my ideas incorperated and would pay a premium for it. Im sure others would too.
GO FOR IT.
Pare your kit down to what you really, really need - and it'll also make you a better builder I think. You can build a perfectly straight frame with no jigs, just a bench vice and a piece of string. Filing miters by hand is a perfect way to understand how the tubes go together. Stuff like that.
Don't make road stuff. Roadies want a cheap frame with a bling paint job - unless you can do the paint job yourself, you'll be giving most of the profits to someone else.
Practice, practice, practice. Don't sell the first few frames you make, ride them yourself or give them to mates.
It's a hard business to make money at - but it is also incredibly satisfying 🙂
http://www.ufv.ca/MarCom/newsroom/bike_frame_course.htm
http://www.yamaguchibike.com/content/School
http://www.downlandcycles.co.uk/frameBuilding.htm
http://www.daveyatescycles.co.uk/custom_bike_frames-about_the_course-44.php
http://www.youtube.com/watch?v=PTPHbOPJ5gA
http://www.youtube.com/watch?v=_2s02of9ReM&feature=related
Interesting, Downland Cycles have the same frame jig as me - for years, I've thought it was a one-off homebrew one...
Starrett have currently got some 32tpi hacksaw (frame tube friendly) blades at a very good price
http://www.starrett.co.uk/shop/warehouse-clearance/hacksawblades/
Your positioning of "good value, high quality" might not be enough to set you apart as that's what many offer and almost everyone claims. So it's more of a basis, something that people expect anyway.
As mentioned above it will help you sell, be remembered, get word-of-mouth, be mentioned (and pictured) in magazines and blogs (!) etc. when you have a strong identity, technically interesting/good AND unique solutions, maybe visually specific cues. And don't underestimate: it will be more fun if people think you are cool and really admire your frames rather than thinking of you as reliable provider of good quality/value (but ultimately boring) custom frames.
You should know (and stick to) what you stand for. Even if this limits your market you will be more easy to identify (and identify with) for those who like your niche.
I know this all sounds terribly marketing babble but I'm afraid it's probably human. Everyone (who's after a custom frame at least) want's to be individual and niche etc. but not that niche that you go "Look, this is my new Simon Cycles frame!" and everybody in the car park goes "Oh really? Never heard about it. Looks nice.".
No, even the least vain wouldn't probably mind to hear "Ah, yeah! Heard about them! But haven't actually seen one yet! Cool! Weren't they featured in so-and-so recently? They must really be *light, springy, stiff, ingenious, whatever you want*! And is it true that the frames are made in the cellar of an old mill? And I've heard that Mr Simon is a bike legend himself. Wasn't he racing "Fat Fells Fever" in 1987?/doesn't he always wear his welders mask, even on the bike... " and your customer can then say "Well, yes, I went over and his workshop is really in an old mill in the midst of perfect trails. No wonder he's got such a good understanding of geometry. What impressed me most though is that he used to be an engineer on an oil platform/in a nuclear plant and that he learned a lot of his skills there. That's also the story behind the little petrol can/radiation symbol sticker on the seat tube..." ...you get the idea!
It must still be authentic though. You don't have to go wild for the sake of it. But recognizability helps. Special and specific in some way. Your way!
Either that or....
http://www.classicrendezvous.com/British_isles/Kowal_Mike.htm
"...one of the UK's most powerful retailers - asking me how many frames I could make in a day !! "
Norris Lockley
Don't make road stuff. Roadies want a cheap frame with a bling paint job
as a cyclist (somebody who rides road/mtb) i would want a top quality tubeset and somebody who understands how a bike will ride when you change the O/D, butting profile, wall thickness etc. there's builders out there like rourke with years of building/racing knowledge who understand all this, it's the new builders who only have fancy paint and lugwork as the 'added value' so you have a couple of choices:
top quality framebuilding with an understanding of what makes a great frame and how it will ride.
bike jewellery for the easily led who want to look at it and post pics on the internet rather than ride it.
there's a market for both, you could of course do both and charge more 🙂
I used to work for a frame builder in Birmingham , that's has sadly gone now ( venom cycles) ... i was the painter there for over 7 years and while the money was crap i absolutely loved my job, riding to work every day and then painting fab frames and building them up and then riding home again 🙂 ......
Id go back tomorrow if they ever started up again 🙂 ..... and i used to do work for mick kowal as well when his painter was on holiday etc ....... havent seen him for over 12 years though ...
Bespoke Bristol
Robin Mather
http://www.youtube.com/watch?v=ZiDNuH0xYEw
Demon
http://www.youtube.com/watch?v=KlKkldKZrYY&feature=mfu_in_order&list=UL
PaulusQuiros
http://www.youtube.com/watch?v=gOyGJfS69oI&feature=mfu_in_order&list=UL
