Forum menu
N+1 'Need'...
 

[Closed] N+1 'Need' a 100mm lightweight carbon FS

Posts: 0
Free Member
 

Hi Angeldust

That's a fair criticism but I still stand by the fact that there is significant enough information on the site to show we are the distributor plus contact forms to ask the question.

Regarding a test ride - If you're in Herts then pop in and see the guys at Kinetic (either Welywn Garden City or Hitchin) and they'll be able to find out the size and dates you're looking for.


 
Posted : 01/09/2015 3:22 pm
Posts: 0
Full Member
Topic starter
 

Many thanks Richie. Kinetic is fairly local.


 
Posted : 01/09/2015 3:36 pm
Posts: 0
Free Member
 

That's a fair criticism but I still stand by the fact that there is significant enough information on the site to show we are the distributor plus contact forms to ask the question.

when you hover over the Brands menu on the Silverfish website then the Turner icon is a bit smaller than the other brands !!!

(but the bottom edge of the Turner icon is chopped off by the bottom of the frame on my browser)


 
Posted : 01/09/2015 3:55 pm
Posts: 1754
Full Member
 

I think the confusion on the Silverfish website is that Turners are not listed as 'Bikes', but 'Frames' and then you need to look at the Turner Build Kits to see what spec you could have on it, if you were to buy it as a complete bike from a shop. However, for another of your similar brands (Yeti), they are listed as complete bikes.

Obviously different people have different user journey's through a website so there is probably no 100% correct answer\design 😉


 
Posted : 01/09/2015 3:56 pm
Posts: 4468
Full Member
 

Many apologies Ritchie, I stand corrected! Glad to hear you're still the go to people for Turner. I didn't know for sure and obviously just read it on here/somewhere. I've never had need of any after sales back up as the bike has been flawless.


 
Posted : 01/09/2015 3:59 pm
Posts: 0
Free Member
 

I think the confusion on the Silverfish website is that Turners are not listed as 'Bikes', but 'Frames' and then you need to look at the Turner Build Kits to see what spec you could have on it, if you were to buy it as a complete bike from a shop. However, for another of your similar brands (Yeti), they are listed as complete bikes.

The only Yetis we list as bikes are ones that are [b]ONLY[/b] supplied as complete bikes. I.e - the 30th Ani SB6C's and the Betis. These cannot be purchased as anything other than bikes, hence the listing.

Other than that Yeti is listed in the same way, frames + builds + forks.

Hope that helps?

Blazing - No problems. Cheers


 
Posted : 01/09/2015 5:08 pm
Posts: 1754
Full Member
 

Apologies for the thread hi-jack OP

Thanks for the reply Richie, I might be thinking back to when the 575 and other models were also available.

Maybe I was looking at the one current example that isn't a Beti or anniversary model.

#ShouldOnlyLookAtEnduroBikes 😉

[url= http://www.silverfish-uk.com/ProductDetail/0/16134/ASRc-Bike ]Yeti ASRc Bike[/url]


 
Posted : 01/09/2015 6:03 pm
Posts: 0
Free Member
 

Somebody mentioned the scott spark.
Mine is sat in bike shop with cracked frame 🙁
Just google it and you will find plenty of people have had the same problem.
been great for 18 months. I've been wondering about the M109 and no someone mentions cracking problems with them..........


 
Posted : 02/09/2015 10:03 pm
Posts: 906
Free Member
 

Don't forget the Yeti ASrC is coming out in an 'enduro' edition that has nothing to do with enduro at all but rather a cheaper layup of carbon (still under 5lb with shock) and a GX based kit for £3299.


 
Posted : 02/09/2015 10:20 pm
Page 2 / 2