Topic starter
Could i fit a Sram rear mech and use Shimano shifters?
Posted : 18/11/2010 11:40 pm
I understand that the cable pull leverage ratio is different on the rear between shimano & sram so the they are not compatible. The front mech / shifter is ok to mix as the cable pull ratio is the same.
Posted : 18/11/2010 11:50 pm
No with 9 speed stuff, yes with the new 10 speed from what I've seen. Front mechs are all fine, it's only rear where there's an issue.
Posted : 18/11/2010 11:50 pm
Topic starter
Hi, thanks for your replies, i'll be knocking that idea on the head then.
Steveo
Posted : 19/11/2010 12:05 am