Forum search & shortcuts

Monarch pressure is...
 

[Closed] Monarch pressure issue.

Posts: 17302
Full Member
Topic starter
 
[#10098989]

Even with 300 psi in it it sags to about 60%.

What has broken?

I used to run rebound at the half way point of late it's been on its second slowest setting.

Ps I'm 13 stone.


 
Posted : 18/07/2018 8:52 am
Posts: 1728
Free Member
 

I would guess at sucked down, air pressure in the negative chamber is compressing the shock.

I would do an air can serice and inspect (as its free), the air can is going to come off with a bang so be careful.


 
Posted : 18/07/2018 10:20 am
Posts: 17302
Full Member
Topic starter
 

It's still under warranty is it something they should honour?


 
Posted : 18/07/2018 10:25 am
Posts: 3508
Free Member
 

Could be a compression circuit failure if its sagging that much.

If its under warranty I'd be sending it back in


 
Posted : 18/07/2018 10:30 am