Forum menu
Topic starter
I have the original Minewt light and would like to upgrade the led.
I can solder no problem but really dont know about LED's, drivers etc.
Any information or advice on what would fit and what to order would be appreciated. I would prefer to keep the same battery.
Mr Troutie, I would be interested to know if you have you ever done one of these (opening them is simple, I resoldered it once after an off).
Many thanks.
Posted : 09/04/2011 12:36 pm
no experience of the mynewts at all.
but an upgrade must be possible post some pics of one in bits. if you can
also what is the battery voltage
Posted : 09/04/2011 12:40 pm
Topic starter
Thanks Chris,
I'll go and have a dig about and let you know.
Chris.
Posted : 09/04/2011 12:45 pm