Forum menu
Forums
Overview
Bike Forum
Mavic spoke fitting...
 

[Closed] Mavic spoke fitting tool.. is there a metal one?

 
 rickmeister
Posts: 6761
Full Member
Topic starter
 
[#2930137]

I am trying to remove spokes from a Mavic ST wheel and having a problem. The plastic spoke tool works if the spokes move easily. If they don't the plastic tool splines get chewed up pretty quick.

Is there a metal version of this spoke key... ?


 
Posted : 10/07/2011 1:11 pm
 Steve-Austin
Posts: 0
Free Member
 

like this 😉
http://www.chainreactioncycles.com/Models.aspx?ModelID=3842


 
Posted : 10/07/2011 1:15 pm
 squiff
Posts: 0
Free Member
 

I have one of those you can have for a fiver posted, it's like new never used


 
Posted : 10/07/2011 1:18 pm
 rickmeister
Posts: 6761
Full Member
Topic starter
 

Squiff, YGM


 
Posted : 10/07/2011 6:11 pm
 squiff
Posts: 0
Free Member
 

rickmeister, YGM


 
Posted : 10/07/2011 9:45 pm
 anc
Posts: 0
Free Member
 

Park do a mavic spoke key which fits crossmax's etc. Park Sw-13c Mavic Spoke Key, if you do a quite a bit of truing its the one to get as even the metal mavic one is a bit chocolate.


 
Posted : 11/07/2011 7:30 am
 onandon
Posts: 6
Free Member
 

you have mail


 
Posted : 11/07/2011 7:57 am
 guitarhero
Posts: 108
Free Member
 

That tool that steve linked to is not the one you need. It is for installing the spoke cups on 819 and 823 rims.
It will not fit your ST wheels.


 
Posted : 11/07/2011 8:47 am
 rickmeister
Posts: 6761
Full Member
Topic starter
 

Thanks all, will try and get it right...


 
Posted : 11/07/2011 9:01 am
 hillsplease
Posts: 49
Free Member
 

I've bought a Superstar one that works on the UST rims - steel eyelet insert, which is nice. There's the smaller fitting at the other end.


 
Posted : 11/07/2011 9:09 am
Forum Jump:
  Previous Topic
Next Topic