Forum menu
Topic starter
Hi as anyone got any idea how the end caps on a 15mm Marin front wheel are removed so I can replace the bearings.
Thanks
Posted : 07/11/2014 4:23 pm
if the end caps spin freely then you should be able to pull them off with a set of pliers...you may need a bit of force for this
but before diong this check the inside of the end caps to make sure there isnt a circlip holding them in place
Posted : 07/11/2014 4:50 pm
Topic starter
Cheers gonzy.
Posted : 07/11/2014 8:12 pm