Forum menu
lyriks - no rebound...
 

[Closed] lyriks - no rebound or damping

Posts: 0
Free Member
Topic starter
 
[#2996661]

loud top out clunk, whats the problem?


 
Posted : 30/07/2011 6:05 pm
Posts: 23334
Free Member
 

They're broken.


 
Posted : 30/07/2011 6:07 pm
Posts: 0
Free Member
Topic starter
 

no shit sherlock


 
Posted : 30/07/2011 6:25 pm
Posts: 0
Full Member
 

Check the oil level on the damper side, which version of lyrics do you have


 
Posted : 30/07/2011 6:41 pm
Posts: 0
Free Member
Topic starter
 

coil uturn 160s with mission control


 
Posted : 30/07/2011 6:45 pm
Posts: 0
Free Member
 

Right - you've had what i had. Take lowers off and you will have all the oil in the lowers. The seal inside the rebound tube assembly will be gone.

A £20 kit from TFT will sort you out. I did mine no probs.

All the oil from inside your dampener will be in your lower leg.

Feel free to post me any Q's

EDIT:

[url= http://www.tftunedshox.com/Catalogue/Shop-RockShox/RockShox/RockShox-Fork-Spare-Parts/Lyrik-Damper-Service-Kit-RS114015087000 ]linky.[/url]

You will need the small fat one in the bottom right - the rebound cartridge slides up inside a thicker tube this seal is what separates the damper oil from going into the lower.

You tube videos available and they show you what to do - although apparently there are two types of rebound assemblies depending on age.

2nd EDIT:

[url=www.sram.com/_media/techdocs/07_RockShox_SPC_Lyrik_B%20Print.pdf]SRAM Technical manual[/url]

The seal is in the bottom of part no.10


 
Posted : 30/07/2011 6:58 pm
Posts: 0
Free Member
Topic starter
 

cheers carbon - thats what i hope


 
Posted : 30/07/2011 11:10 pm
Posts: 0
Free Member
Topic starter
 

Just stripped and cleaned them. No extra oil in the lowers, oil seemed ok in the damper.

New oil and greased seals, rebound is working again - wonder for how long though?


 
Posted : 31/07/2011 11:47 am
Posts: 0
Free Member
Topic starter
 

Final aoddness - in the rebound shaft the rebound alan key is firmly stuck in the damper, the head comes off (red bit) so i can get the foot nut out, any ideas of how to remove this?


 
Posted : 31/07/2011 11:48 am
Posts: 0
Free Member
 

my Boxxers did that - pliers/molegrips + force


 
Posted : 31/07/2011 11:52 am
Posts: 0
Free Member
Topic starter
 

any more advice on either issue?


 
Posted : 31/07/2011 7:04 pm