[Closed] Lets see your 29er Scandals

Not raw and not the best shot but;

[URL= http://i239.photobucket.com/albums/ff167/LukeBurstow/005_zps9f317b3e.jp g" target="_blank">http://i239.photobucket.com/albums/ff167/LukeBurstow/005_zps9f317b3e.jp g"/> [/IMG][/URL]

Was running it SS for a while too.

Quite liked it (did the Brighton Big Dog on it and it was good) but it was one bike too many when a new one arrived.

DrP has it now.

Thanks wwaswas, like it. Toying with SS but will probably go 1x10. Will probably end up trying a few different builds as it's going to be a bit of a 29er experiment.

[img] https://lh6.googleusercontent.com/-OvWo9qH-Zow/UmkGcXx70WI/AAAAAAAAC2c/TKbGqATbPo4/w981-h553-no/2013-10-24 [/img]

Currently being stripped before selling the frame!

[img] [/img]

Its been a great bike for the money, will be getting a dropper soon too.

More musings here > http://www.retrobike.co.uk/forum/viewtopic.php?f=21&t=218402

[img] [/img]

Not the best picture and not my garden!!!
[img] [/img]

[url= http://farm9.staticflickr.com/8446/7832716796_5525f6746f.jp g" target="_blank">http://farm9.staticflickr.com/8446/7832716796_5525f6746f.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/n_b_t/7832716796/ ]ScandAl[/url] by [url= http://www.flickr.com/people/n_b_t/ ]Notoriously Bad Typist[/url], on Flickr

OP, your build sounds a lot like mine...

[img] [/img]

Thanks all, nice photos.

YoKaiser, thanks, shall check out your musings later. (Liking the x-lite clamp!)

Benman, spent ages hovering over the white or black fork buttons! Went for black in the end but had I seen yours I may well have gone for white! Will probably go flat bars, 1x10, and more xc race than trail but other than that it'll be quite similar.

Btw, anyone know what diameter the head tube is? Can't see it on the on-one site.

headtube is tapered - 1.5 at the bottom, 1.125 at the top

Thanks NBT, that's the steerer tube though. Wondering what the actual head tube diameter is? I think it's 44 top and 49.7 bottom but the frame is in the loft and I need to get it down to check. Fork is tapered so I think I need a 2F Hope headset (or is it tapered E2?) Anyone know for sure?

Here's mine, with a very similar base build to what the OP is suggesting. Reba RLT with Hope Pro2 Evo on Crest.

[url= https://lh5.googleusercontent.com/-2jaPtCcrWJw/UmkQN9swiOI/AAAAAAAAAXw/Hb7LbdnDTpU/w870-h871-no/P1010611.JP G" target="_blank">https://lh5.googleusercontent.com/-2jaPtCcrWJw/UmkQN9swiOI/AAAAAAAAAXw/Hb7LbdnDTpU/w870-h871-no/P1010611.JP G"/> [/img][/url]

They ride so well! A superstar T2 fits and is so far so good on mine.

http://superstar.tibolts.co.uk/product_info.php?cPath=25&products_id=425

assuming you're using a taper fork, the SHIS identification is ZS 44/28.6 | EC 49/40

Thanks cp, nice bike 🙂 Looks like it is ZS 44/28.6 / EC 49/40, or Hope 2F then. Shall try and do a bike build thread when I've got the parts and time.

Here's my STW box ticker (1X10 with Works Components thick/ thin ring, rigid 29er, smattering of Hope anodized parts and tyres that look nice, but aren't actually that good!)

[img] [/img]

Built up on the cheap for the winter.

Great looking bikes. Now discontiuned - I procrastinated too long and missed the bus.

Now discontiuned - I procrastinated too long and missed the bus

According to an email I have from On One from a couple of weeks ago, they reckon they have more on order/on their way. I'd heard the discontinued rumour so I quizzed them when deciding between 18 & 19.5 after the 19.5 had gone out of stock... but they told me they'd checked with purchasing and were on order. 'It's one of our most popular frames'.

and tyres that look nice

that's debateable!

scud, a bit of a dogs dinner that 🙂 Not bad as a winter bike though!

According to an email I have from On One from a couple of weeks ago, they reckon they have more on order/on their way. I'd heard the discontinued rumour so I quizzed them when deciding between 18 & 19.5 after the 19.5 had gone out of stock... but they told me they'd checked with purchasing and were on order. 'It's one of our most popular frames'.

Really? I emailed them a couple of weeks ago too, and was told 'discontinued, no more coming'. I was surprised - as you say, they seem very popluar and well received.

I'll keep checking.

[img] [/img]

I didn't have it for long

[IMG] [/IMG]

[img] [/img]

Now running Jones bars and Arch Ex

I'd heard the discontinued rumour so I quizzed them when deciding between 18 & 19.5 after the 19.5 had gone out of stock... but they told me they'd checked with purchasing and were on order. 'It's one of our most popular frames'.

On a slight tangent, anyone know if there'll be any more 16" frames?

(If you say his name three times on a thread...)

Quite a variety of builds and uses on here! Anyone racing on theirs?

I am, it's what I built it for 🙂

Bontrager 29-1 2.2 tyres set up tubeless
2x9 (on an XT triple crank, granny and 36t middle), 11-34 cassette
It's now sporting a PX saddle, Giant Connect SL stem, Answer flat bars.

I reckon I might soon make it 1x9, I never seem to use the granny ring.

Gets me to some decent finishing spots on local (peak district) MTB orienteering events 🙂

Not done any xc racing for a while so may try and do a Brass Monkeys and the xc spring series on it but with second kid on the way in Feb I think it'll mostly be training/local rides for a while. My trail bike build is just too cumbersome for local stuff (unfortunately not in the Peaks) so something racier will be good, probably should have got a CX bike!

fatladridesbikes - Member

Currently being stripped before selling the frame!

I'd be interested in the frame Simon. Drop me an email (address in profile).

Cheers

.... you do realise it's pink, right? 🙂

[img][URL= http://i833.photobucket.com/albums/zz259/monkeyfiend/9D81DC31-E6F2-47B4-AE3A-181628A64A11-6342-00000886EB9D0267_zps3df379bc.jp g" target="_blank">http://i833.photobucket.com/albums/zz259/monkeyfiend/9D81DC31-E6F2-47B4-AE3A-181628A64A11-6342-00000886EB9D0267_zps3df379bc.jp g"/> [/IMG][/URL][/img]

Very early one, still going strong.

Like the sounds of a pink one though.....

Monkeyfiend, I rather like that. I did seriously consider those forks.

[URL= http://i833.photobucket.com/albums/zz259/monkeyfiend/9F06AC3C-AF96-43B3-9DB4-9F677F0232DE-5338-0000040AE723A8B5.jp g" target="_blank">http://i833.photobucket.com/albums/zz259/monkeyfiend/9F06AC3C-AF96-43B3-9DB4-9F677F0232DE-5338-0000040AE723A8B5.jp g"/> [/IMG][/URL]

This is what it looked like for the past few years.
The idea now is that I go out regardless of the weather, so the forks are ideal.

[img] [/img]

Monkeyfiend, well the first build picture was nice!

Rorschach, are those Jones'd XTR cranks? I have a set in the parts bin that I'm tempted to tackle with an angle grinder. Which ring are you using for the stupid BCD size?

Blackspire Mono Veloce.CRC had 33t ones on offer for £25 a while back....so I bought all of them (2 down,2 to go!)

Lucky find! Getting hold of rings is the only thing that puts me off really. Could go homebrew but I've heard the wait can be months 🙁

Bit late to the party but here's mine

[img] [/img]

Nice build Bazz. Old skool with a triple and bar ends. I like.

deffo discontinued i called them today.

[url= http://farm9.staticflickr.com/8178/8033734813_aec5ae7b27_o.jp g" target="_blank">http://farm9.staticflickr.com/8178/8033734813_aec5ae7b27_o.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/73773087@N07/8033734813/ ]WP_001790[/url] by [url= http://www.flickr.com/people/73773087@N07/ ]h4muf[/url], on Flickr

Now with 100mm Rebas.

Nice build Bazz. Old skool with a triple and bar ends. I like.

Thanks, 3X9 gives this bike a huge amount of versatility, and bar ends highly underrated imo, especially if your used to riding on the hoods of a road bike.

[img] [/img]
But now run it 1 x 10
[img] [/img]
[img] [/img]

tk46hal, what stand is that?

It's an Andy Stand. Met Andy at a few events over the years and he's a good guy. Good product too if you have a chainset it'll fit. I think he does a collapsible one now too.