Forum menu
J Tech suspension t...
 

[Closed] J Tech suspension tuning

Posts: 0
Free Member
Topic starter
 
[#4342006]

Has anyone used j - tech to tune their suspension, how did it perform afterwards??


 
Posted : 08/09/2012 8:11 am
Posts: 3127
Full Member
 

I've had several things done by them with very good results. A fox rp2 was serviced and tuned with a shim stack to give it the same feel as a push tuned one I had before. It gave more support and didn't blow through it's travel so easily. Big thumbs up from me.


 
Posted : 08/09/2012 8:57 am
Posts: 14707
Free Member
 

Had a couple of m8's forks done there, for a std service which he did exactly that & they've come back and worked fine...
Would happily use him again.


 
Posted : 08/09/2012 10:36 am
Posts: 0
Free Member
Topic starter
 

Thanks for your replies, I'm getting the length and stroke adjusted on a RP23 to fit my old Stump Jumper as it has an irregular size afr shock.
Any other input very welcome:)


 
Posted : 08/09/2012 10:57 am
Posts: 14707
Free Member
 

ex-pearce cycles mechanic I believe, with a good if understated reputation IIRC.
[url= http://dirt.mpora.com/news/young-rippers-bikes-harry-barretts-j-tech-suspension-scott-spark.html ]Dirt article[/url] on a special he did..


 
Posted : 08/09/2012 11:08 am
Posts: 2335
Free Member
 

Had my lyriks and rear shock done a few weeks ago, great service.


 
Posted : 08/09/2012 2:26 pm
 Ewan
Posts: 4395
Free Member
 

Also had my lyriks and rear shock done a few months ago - excellent service - made it very convenient. Also custom tuned the lyrik to ride higher in it's travel - worked a treat and the fork is very supple now but without diving too much.

Intend to use them again and recommend them to others!


 
Posted : 08/09/2012 2:46 pm
Posts: 0
Free Member
 

Would highly recommend James at J Tech, nothing is too much trouble and the advice is excellent.


 
Posted : 08/09/2012 7:32 pm