Forum menu
Isopropyl - Are the...
 

[Closed] Isopropyl - Are these any good

Posts: 37
Free Member
Topic starter
 
[#2777021]

For cleaning brakes and services forks etc?
[url= http://cgi.ebay.co.uk/50-NHS-QUALITY-ISOPROPYL-70-ALCOHOL-SWABS-WIPES-IPA-/140538464834?pt=Computing_ComputerComponents_Fans_Heatsinks_SR&hash=item20b8beca42#ht_1200wt_908 ]NHS IPA Pads[/url]


 
Posted : 22/05/2011 12:06 pm
Posts: 34530
Full Member
 

yep i reckon theyd do the job, i use ipa for cleaning my discs


 
Posted : 22/05/2011 12:07 pm
Posts: 0
Free Member
 

I use mud for cleaning my discs.


 
Posted : 22/05/2011 12:20 pm
Posts: 0
Free Member
 

they are small only a maybe 3 cm x 5 cm or something similar - but yes they will do fine


 
Posted : 22/05/2011 12:23 pm
Posts: 52609
Free Member
 

bend & replace is my cleaning method


 
Posted : 22/05/2011 12:27 pm
Posts: 0
Free Member
 

..wayyy too small to be of any use!
clean brakes??? lol


 
Posted : 22/05/2011 1:02 pm
Posts: 37
Free Member
Topic starter
 

Clean brakes after bleeding etc.


 
Posted : 22/05/2011 1:21 pm
 sv
Posts: 2815
Free Member
 

Plenty of IPA/rubbing alcohol on eBay or Maplin for an aerosol.


 
Posted : 22/05/2011 1:25 pm
Posts: 0
Free Member
 

I have used them to clean brakes - its possible. one swab per disc


 
Posted : 22/05/2011 2:00 pm
Posts: 66111
Full Member
 

A big bottle of isopropyl would make more sense really


 
Posted : 22/05/2011 2:10 pm
Posts: 0
Free Member
 

I have a couple of Fibrax swabs that I keep in my riding pack, although I've only had to use one in about five years - was glad I had it, though.

For general maintenance, it makes more sense to me to get a bottle of IA and use a cloth. The swabs fall apart quite easily when used on a brake rotor. It's worth bearing in mind that you should really only clean a rotor if it has become contaminated with oils. Mud/dirt will be removed/obliterated by using the brake. IA isn't essentialas hot soapy water (and rinse) will remove brake fluid; but it does have the advantage of being a much tidier/drier way of doing it.


 
Posted : 22/05/2011 2:20 pm
Posts: 11634
Free Member
 

As above, get an aerosol from Maplins. I can get Isopropanol wipes from work in foil sachets, they are around 20cm square and are still a bit small to clean a grubby rotor.

Spray with a clean rag is much easier.


 
Posted : 22/05/2011 3:10 pm
Posts: 37
Free Member
Topic starter
 

Thanks, bought a 500mm bottle.


 
Posted : 22/05/2011 3:11 pm