Forum menu
Not bothered as I'm seasoned an know what to do with pressures etc but:
a) Shock pressure prior to blown nitrogen seal / service by TfT = 155
b) TfT recommended shock pressure = 200
c) Shock pressure after service by TfT and a couple of rides = 155
How could a crew like TfT be so wrong? With 200 psi I was getting 1/2 travel *shakes head*....
did you tell them you were a hard rider but really just a pansy like the rest of us ?
conclusion: you ride like a mincer
There's not going to be any proper technical description anytime soon is there.....
Ah.....
What sag does the TFT recommended pressure give? If their pressure gives 25% ish sag, then yes..your mincing, if it's hardly any to non then it's wrong, or you fibbed when they asked how much you weigh...
Edit, although you'd have to have fibbed yourself fatter to be that far out..
See I tend to ignore them and go for my own preference anyway. I like soft sus, and don't care if the bike blows through its travel a few times a ride.
No, its definately wrong - it gave about 5% Sag. FWIW I gave them all the correct detail.
I ride mine with 30% Sag and propedal set to "1" which gives me 95% travel over the duration of my "normal" trails...
And like ADH I like soft comfy FS
Am I the only one who read that as "I ride min[b]c[/b]e with 30% Sag..."?
Mmmm Keema Spinach. Lovely - and iDave compliant too.
OMGOMGOMGOMG I am so having keema mince for dinner tonight
Welcome to SingletrackWorld...
sigh.
i bought a new tftuned fox van form them - coil. they recommended a spring that was 350lb, in reality i needed a 450lb.
they make msitakes
30% sag sat on bike, 90% travel when I bounce up and down like a loon. Job done.
How do you know your gauge is correct ?