Forum menu
How do you remove a...
 

[Closed] How do you remove a Pro2 hub QR adaptor?

Posts: 193
Free Member
Topic starter
 
[#916317]

Just seem to push fit but how to remove?


 
Posted : 02/10/2009 11:44 am
Posts: 0
Free Member
 

Front? Just pull it out.


 
Posted : 02/10/2009 11:45 am
Posts: 941
Free Member
 

Just pull, they can be a little bit sticky though. I thought there was something holding mine it at the time.


 
Posted : 02/10/2009 11:46 am
Posts: 193
Free Member
Topic starter
 

It ain't budging


 
Posted : 02/10/2009 11:51 am
Posts: 0
Free Member
 

James

clamp it in a vice with soft jaws then wiggle the wheel by holding the rim'//tyre. wiggle side to side of the jaw clamp it will come out.

mine were stuck well hard. had to use a soft jaw and vice.


 
Posted : 02/10/2009 11:57 am
Posts: 0
Free Member
 

More porage


 
Posted : 02/10/2009 11:57 am
Posts: 0
Free Member
 

Needle nose pliers and pull like a bastard seemed to work for me.


 
Posted : 02/10/2009 12:00 pm
Posts: 507
Free Member
 

If all else fails try tapping a long rod through from the other side.


 
Posted : 02/10/2009 9:33 pm
Posts: 0
Free Member
 

long nose pliers turn & wiggle while pulling .


 
Posted : 03/10/2009 12:14 pm