Forum menu
Topic starter
I think there was a thread about this but I can't find it.
Can you run hope v3 e4 brakes with shimano 200mm and 180 mm discs?
Thanks.
Posted : 09/01/2017 6:45 pm
Yes
Posted : 09/01/2017 7:06 pm
Run shimano disks and mount hard wear with e4s on the Mrs bike. 180 each end but would work with other sizes.
Posted : 09/01/2017 7:12 pm
Topic starter
That's good, what adapters?
Posted : 09/01/2017 7:18 pm
Have a wee look [url= http://www.hopetech.com/product/mounts/ ]here[/url]
Posted : 09/01/2017 7:20 pm
Topic starter
Thanks. So it looks like post to post is 180mm.
Posted : 09/01/2017 7:40 pm
It looks like you'll need a "Mount C" for the front, and a "Mount L" for the rear.
Assuming it's post mount back and front that you need.
Posted : 09/01/2017 9:06 pm
Topic starter
L and N for 180 all round but no option for post front 200.
Posted : 09/01/2017 10:47 pm
It looks like you'll have to go for the one for 203mm.
I wouldn't worry, 1.5mm extra on the radius won't harm.
Posted : 09/01/2017 11:06 pm