Forum menu
Topic starter
The BB30 on my Whyte sounds terrible, now there is a small grub screw on the non drive side. What is this for? Can it be removed to squirt some grease in there? If not I am guessing it's due for changing. (6 months old but it's seen a lot of mud)
Posted : 12/12/2012 2:07 pm
That locks the pre load assembly.
just take the crank out and grease the bearings and lube the axle.
it's a simple job on BB30 cranks.
Posted : 12/12/2012 2:12 pm
Topic starter
Cheers on and on.
Posted : 12/12/2012 2:16 pm
You may find the BB is sick but worth a re-grease in the first instance.
worth seeing if you can nurse it though the winter 🙂
Posted : 12/12/2012 2:19 pm
Topic starter
I was hoping that a simples re grease would do. First bike with one of these fitted so it will be interesting to see how the bearings do. 🙂
Thanks again.
Posted : 12/12/2012 2:23 pm