Suggestions please for Campag compatible disc hubs.Don't suggest Royce. 200 quid plus is a touch too much.
fulcrum wheels and DT would be worth a looking at, I know you can swap over freehubs on the road wheels, MTB ones might use the same
system/free hub.
Hope. They make the road wheels with campag free hubs now, i would be surprised if you can't swap.
you might have to go pro3 to do he above though.
Meant to say it's raod wheels i am building although doubt it really matters.
or just get shimano wheels and use a conversion cassette like american classic, i used a 10 speed campag one a few times on shimano wheels and it was fine
think I still have it
That is the reason why I am looking to swap hubs. I am using a 10 speed Shimano hub and cassette on my Cotic X with discs. Campag transmission though. Shimano splined, Campag 10 speed cassettes are few and hard to find. Ambrosio's would do but I can't actually find one.
All the various Shimergo options change the numbers of gears ie 9 from a 10 speed mech.
I'd happily keep t the Shimano splined hubs as this gives me a greater choice.
Didn't know about the American classic.
Want to part with yours?
same issue for me so I've just stuck with a Shimergo setup which works perfectly but does mean 9 instead of 10 speed. I have been considering the 10 speed ambrosio cassette but by the sounds of it maybe that's not readily available.
My 10 speed Shimano cassette works well with Campag 10 speed shifters but just a touch noisy and now I have got the system working I am playing with the small things.
hang on, i'll go and check the shed
[IMG] 
[/IMG]
It's a 12/25, had a little light use on my cross bike on a second set of wheels I used on the road, very rarely. I found it worked well and I didn't have to touch the gears to change between this and a wheel with an actual Campag cassette on.
Think it cost me about $100 from America strangely enough , yours for £25 posted if you like.
smcfarlane [at] gmail [dot] com
Either HOPE hubs, or Marchisio sprockets.
I don't think the hope hub campag cassette body with the pro2s as the road hubs a slightly different.
I'm using Bonty Race Lite X wheels which are rebadged DT 240 hubs which I've put one of there campag cassette bodies on.
Works great but not cheap.
Restless, email sent
