Forum menu
Could this be a cra...
 

[Closed] Could this be a crack (sorry, inconclusive pics ahead)?

Posts: 0
Free Member
Topic starter
 
[#3847093]

I noticed this a few months ago now and didn't think much of it, but now I'm considering selling the bike. I marked the ends of it when I first saw it, and have probably done a couple of hundred km since with no 'growth' in the mark. It looks a lot like other scratchs in the powdercoat, but the position makes me suspicious. It's a 2006 Heckler, btw.

[url= http://farm8.staticflickr.com/7176/7053504567_954b4f8c86.jp g" target="_blank">http://farm8.staticflickr.com/7176/7053504567_954b4f8c86.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/warpcow/7053504567/ ]P1020268[/url] by [url= http://www.flickr.com/people/warpcow/ ]warpcow[/url], on Flickr
[url= http://farm8.staticflickr.com/7084/6907416200_b0c1d2815d.jp g" target="_blank">http://farm8.staticflickr.com/7084/6907416200_b0c1d2815d.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/warpcow/6907416200/ ]P1020260[/url] by [url= http://www.flickr.com/people/warpcow/ ]warpcow[/url], on Flickr


 
Posted : 07/04/2012 2:39 pm
Posts: 3064
Full Member
 

Probably just a sticker


 
Posted : 07/04/2012 2:40 pm
Posts: 3722
Free Member
 

Looks like a scratch.


 
Posted : 07/04/2012 2:44 pm
Posts: 0
Free Member
 

Looks like a scratch. The way it is split with two close lines together in a fork, a crack is unlikely to look like that. Also, after all that time if it was a crack that size it would have opened up.

Unfortunately the only way to be 100% sure is to have it tested which wouldn't be cheap.


 
Posted : 07/04/2012 2:47 pm
Posts: 0
Free Member
Topic starter
 

Thanks, that matches my thinking about it. I guess my question left the possibility that anything [i]could[/i] be a crack.


 
Posted : 07/04/2012 2:51 pm
Posts: 0
Free Member
 

Almost certainly just a scratch; but it looks as though the first couple of turns of thread have been stripped from the left-hand hole in the bottom picture.


 
Posted : 07/04/2012 2:53 pm
Posts: 0
Free Member
Topic starter
 

Almost certainly just a scratch; but it looks as though the first couple of turns of thread have been stripped from the left-hand hole in the bottom picture.

Just double-checked and the threads are fine. I guess they must just be out of focus in the photo. Thanks!


 
Posted : 07/04/2012 3:46 pm
Posts: 0
Free Member
 

but now I'm considering selling the bike

which makes you a low-life, rip-off scumbag, does it not?


 
Posted : 07/04/2012 3:59 pm
Posts: 0
Free Member
 

but now I'm considering selling the bike

which makes you a low-life, rip-off scumbag, does it not?

Have we missed an advert wherin the bike is being offered in 'as new condition' or is this just a bid to qualify for an Olympic Gold in jumping to conclusions?


 
Posted : 07/04/2012 4:06 pm
Posts: 41395
Free Member
 

"brainslikerocks" more like!


 
Posted : 07/04/2012 4:16 pm
Posts: 738
Full Member
 

Have a look through a good magnifying glass. That's what l did with my Zesty to confirm a crack.


 
Posted : 07/04/2012 5:47 pm
Posts: 0
Free Member
 

[img] [/img]


 
Posted : 07/04/2012 5:54 pm
Posts: 738
Full Member
 

๐Ÿ™‚


 
Posted : 07/04/2012 5:59 pm
Posts: 0
Free Member
Topic starter
 

which makes you a low-life, rip-off scumbag, does it not?

Only if I sold it to you, without making you aware of the 'scratch', which I'd obviously do for anyone else, and then didn't refund you anything for being a knob, right?


 
Posted : 07/04/2012 6:02 pm
Posts: 0
Free Member
Topic starter
 

I've never needed to own a magnifying-glass before now.


 
Posted : 07/04/2012 6:02 pm
Posts: 5559
Free Member
 

Scratch IMHO
Unlikely to get a curved crack
Unlikely to get a crack through weld
Unlikely forit to split in two in the centre of a crack.

take the paint off and see if it still there to be sure???


 
Posted : 07/04/2012 6:05 pm
Posts: 738
Full Member
 

Good point! I got mine at work. Does help though. Maybe borrow one?


 
Posted : 07/04/2012 6:29 pm
Posts: 0
Free Member
 

I don't want to put a dampener on things, but make sure you check carefully, this is what happened to my Heckler (on the weld as well and not straight at all) and it was a crack....

[img] [/img]


 
Posted : 07/04/2012 7:00 pm
Posts: 0
Free Member
Topic starter
 

I've seen a few of the newer models crack there, but never one as old as mine. I believe they generally cracked around the pivot on the downtube. I guess I'll have a go at looking under the paint when I get a chance.


 
Posted : 07/04/2012 7:11 pm
Posts: 0
Free Member
 

Not a crack, crack would have followed the arc of the weld, as for won't crack on a weld i have seen plenty of ally tig welds crack right down the middle.


 
Posted : 07/04/2012 10:24 pm