Forum menu
Forums
Overview
Bike Forum
Correct brake mount
 

[Closed] Correct brake mount

 
 pc2017
Posts: 0
Free Member
Topic starter
 

Before ordering I just wanted to confirm these are the correct brake mounts, they are going on a Nomad 4 which states 180mm post mount to post mount.
I am running 180mm rotors & Guide RS brakes:

http://www.chainreactioncycles.com/hope-post-to-post-disc-brake-adaptor/rp-prod13728?utm_source=customerops&utm_medium=techsupport&utm_campaign=CRC011

Thanks


 
Posted : 31/08/2017 11:49 am
 pc2017
Posts: 0
Free Member
Topic starter
 

Bump 🙂


 
Posted : 01/09/2017 9:56 am
 Potdog
Posts: 0
Free Member
 

Think your question is a little ambiguous, but if we're talking rear brake and your Nomad frame takes a 160mm rotor without any adapters then a +20mm post to post adapter is right for you. The added complication being that SRAM (I think) use a slightly different adapter which has the caliper more inline, where the Hope ones shift the caliper along a little. Might make a different, might not. I only tried it the other way, Hope brake on SRAM adapter and the caliper fouled the adapter.

Sorry, not a great help in the end.


 
Posted : 01/09/2017 10:15 am
 Potdog
Posts: 0
Free Member
 

More like this one [url= https://www.evanscycles.com/avid-cps-160mm-rear-180mm-front-post-mount-adaptor-EV157270 ]AVID / SRAM Adapter[/url]

Also, this may or may not be useful - [url= http://www.sram.com.cn/sites/default/files/techdocs/95-5018-000-000_rev_b_disc_brake_caliper_mounting.pdf ]SRAM BRAKING PDF[/url]


 
Posted : 01/09/2017 10:18 am
Forum Jump:
  Previous Topic
Next Topic