Charge plug1 rear mech adapter...

Anonymous

Posts: 0

Topic starter

I have a plug1 ss, I would like to fit a rear mech, so a 1x9/10, new wheel needed 11-25 cass xt mech and shifter, but has anyone found a mech hanger which is suitable? Or do I have to order a plug3 frame....thanks

Posted : 19/12/2014 5:10 pm

woody2000

Posts: 8177

Free Member

Looks SS specific to me? Is there somewhere to even bolt a hanger?

Posted : 19/12/2014 5:15 pm

Anonymous

Posts: 0

Topic starter

Nowhere to bolt a hanger no, thought a hanger could possibly
fit in the outside of the frame on the skewer

Posted : 19/12/2014 5:35 pm

wwaswas

Posts: 251

Full Member

if it's horizontal dropouts this will probably work;

[url= http://www.chainreactioncycles.com/dmr-chain-tugs-mech-hanger/rp-prod249 ]http://www.chainreactioncycles.com/dmr-chain-tugs-mech-hanger/rp-prod249[/url]

Posted : 19/12/2014 5:37 pm

Anonymous

Posts: 0

Topic starter

Thanks wwaswas, looks like it could work.
Thanks

Posted : 19/12/2014 6:02 pm

bigblackshed

Posts: 5670

Full Member

Check the width of the rear drop outs. I think they are 120mm (track). A MTB hub won't fit, 135mm. Most road bikes are, or were 130mm.

Might be worth exploring an internal gear hub. I think Charge have put a Sturmey Archer on some of the Plug range frames.

Posted : 19/12/2014 6:11 pm

Forum menu

[Closed] Charge plug1 rear mech adapter...