Forum menu
Topic starter
Need the thickness - front to back of the top and bottom spacer (the bit between the fork mount and Caliper) on a Shimano plus 20mm mount
Posted : 02/07/2019 9:00 pm
As in the depth of the threadless hole:
Up = 14mm
down = 8.9mm
Thickness : as in from left of bike to right: 11mm for both.
give or take 0.1mm depending on where the digi caliper measured.
Measured on a new +20 Shimano spacer just arrived from Amazon.
Posted : 02/07/2019 9:04 pm
Topic starter
Thanks that’s ace
Posted : 02/07/2019 9:14 pm