Cable guides for full length outers...

sv

Posts: 2815

Free Member

Topic starter

[#2514775]

Anybody got a link to Wiggle/CRC, think I remember a thread on it a while back but my searching isnt finding much.The guides that fit to the braze on gear cable holders.

Thanks.

Posted : 28/02/2011 1:39 pm

hexhamstu

Posts: 254

Free Member

I just drilled mine out! 😀

Posted : 28/02/2011 1:45 pm

Dr_Bakes

Posts: 61

Full Member

I bought some of the [b]Jagwire[/b] ones from Taiwan on ebay as I couldn't find them cheaper in the UK. JE James had some of the silver clamping ones but I specifically wanted them in black. Worked out at less than £12 for four and came in less than a week iirc.

Drilling out the stops loooked like it would be a nightmare on my frame given the positions in relation to the headtube and seatube.

Posted : 28/02/2011 1:55 pm

BigJohn

Posts: 10747

Full Member

Surely an alternative to drilling out cable stops is hacksawing the end plate off.

Posted : 28/02/2011 2:04 pm

sh1tforbrains

Posts: 0

Free Member

Or, if you drill discrete holes in the frame tubing you can re-route them internally. I did that with my Stumpy. Much neater.

Posted : 28/02/2011 2:11 pm

Gibbysrabbit

Posts: 0

Free Member

These?
http://cgi.ebay.co.uk/Jagwire-Hydraulic-Cable-Grip-Part-JWDB04_W0QQitemZ140516620360QQcategoryZ58082QQcmdZViewItemQQ_trksidZp3286.m7QQ_trkparmsZalgo%3DLVI%26itu%3DUCI%26otn%3D2%26po%3DLVI%26ps%3D63%26clkid%3D7405746969235052594
Let me know if your getting some, looks like something i need.

Posted : 28/02/2011 2:16 pm

Forum menu

[Closed] Cable guides for full length outers...