Forum menu
Hi all,
I am changing some of the bearings on my 2008 575. Its the first time I've attepted this so don't want to screw it up and wonderered if anyone out there had advice and some spicific imfo.
I need to know the exact size of the bearings and the size of the nutlock.
also what torque to tighten it too?
any help greatfully recieved,
thanks
john
I did have a list of the bearings somewhere but can't see it now
IIRC some of the bearings were non-standard, and buying a kit from Yetifan was the easiest route to go.
[url= http://yeticycles.com/pdf/manuals/08-09OwnersManual575.pdf ]BOOM![/url]
I made this for my 06 model - shouldn't be too different judging by pinetree's link
[url= https://docs.google.com/open?id=0B-8Gg_amaxybZjA5MmQwYjYtNTEyZi00YmUzLWEyMDQtZjE4M2FiNWM1MWI0 ]YETI BEARING REPLACEMENT[/url]
Has been quite a popular document down the years 😀
(Although there are a few bits I've done differently since)
thank you DezB,
a fantastically thourough document!
pinetree - i hope you are alright
pinetree noticed it was a link, now i get it, thankyou.
There's method in my madness 😉