Bearing puller suggestions

oldtalent

Posts: 0

Free Member

Topic starter

[#10129756]

Im fed up of sockets, hammers, bent bits of m8 rod & the new bearing ending up in a worst state then the old ones after trying to fit them.

Is there some sort of universal bearing puller for suspension bearings that fits everything?

Or is taking the bike to the shop the best option.

EDIT this is for suspension bearings.

Posted : 05/08/2018 4:13 pm

onewheelgood

Posts: 4524

Full Member

The Giant Maestro Bearing Kit covers a few sizes - obviously works OK if you have a Giant Reign/Trance/Anthem, but I'm pretty sure a previous thread confirmed that it covered the sizes needed for some other makes too.

Posted : 05/08/2018 4:27 pm

al2000

Posts: 19

Full Member

I've got a couple of bearing pullers and presses from here :

https://www.bearingprotools.com

Various sizes available, decent price and work very well.

Posted : 05/08/2018 5:19 pm

MTB-Rob

Posts: 0

Free Member

Have a look at these,

https://www.kineticbikebearings.com/tools-12

Posted : 05/08/2018 6:27 pm

Tracey

Posts: 9919

Full Member

We have one like this

https://www.ebay.co.uk/itm/9PC-Heavy-Inner-Bearing-Puller-Set-Remover-Slide-Hammer-Internal-Kit-Blind-Hole/253765648803?_trkparms=aid%3D555017%26algo%3DPL.CASSINI%26ao%3D1%26asc%3D53377%26meid%3D3a80f738d3bd484286a849e5aec7f474%26pid%3D100506%26rk%3D1%26rkt%3D1%26%26itm%3D253765648803&_trksid=p2045573.c100506.m3226

And something like this

https://www.ebay.co.uk/itm/Bike-bearing-press-for-pivot-and-bb30-bearings/323371848421?_trkparms=aid%3D555017%26algo%3DPL.CASSINI%26ao%3D1%26asc%3D53377%26meid%3Dd1982d62ed024bf2a4ee9c2bf6407990%26pid%3D100505%26rk%3D1%26rkt%3D1%26%26itm%3D323371848421&_trksid=p2045573.c100505.m3226

And the hope bottom bracket tool.

Can sort most of the jobs with the above

Posted : 05/08/2018 6:59 pm

oldtalent

Posts: 0

Free Member

Topic starter

All good suggestions thanks.

I hadn't realised I would need a press per bearing size. Obvious when thinking about it.

Posted : 05/08/2018 8:01 pm

[Closed] Bearing puller suggestions