Forum menu
Forums
Overview
Bike Forum
BB90/30 style BB be...
 

[Closed] BB90/30 style BB bearing supply?

 
 bonesetter
Posts: 3
Free Member
Topic starter
 
[#2426698]

I'm trying to locate some replacement bearings for my custom frame's BB shell.

I've measured them at 37mm OD, 24 ID. I believe the ones fitted are Phil Wood, but there are a few different makes out there

So, can anyone supply a link for some like these in the pic with the protective dust/dirt covers?

There's a few on [url= http://www.chainreactioncycles.com/Categories.aspx?CategoryID=145 ]CRC[/url] but there's no specs on the listings

Cheers
[img] [/img]


 
Posted : 01/02/2011 8:14 pm
 bonesetter
Posts: 3
Free Member
Topic starter
 

Anyone?


 
Posted : 02/02/2011 9:56 am
 AndyA
Posts: 0
Free Member
 

Try www.enduroforkseals.com or www.BETD.com.


 
Posted : 02/02/2011 3:43 pm
 Dougal
Posts: 0
Free Member
 

It's not BB30 you have, as that has a 30mm ID/axle. It will be BB92 most likely.

Standard bearings from a bearing supplier will work.


 
Posted : 02/02/2011 4:11 pm
 bonesetter
Posts: 3
Free Member
Topic starter
 

Dougal I think this is my biggest difficulty - I don't know what I have to look for

Here's another shot of the BB shell with the Bearings fitted. It's the dust cap I need too - it goes all the way down, more than the ones in the 1st pic I posted

I am using a standard XT crank if that helps

Andy - cheers for the links, they look good

[img] [/img]


 
Posted : 02/02/2011 5:45 pm
Forum Jump:
  Previous Topic
Next Topic