Avid Juicy 5 Banjo Orings

clanton

Posts: 0

Free Member

Topic starter

[#1186823]

After replacing the damaged pistons on a set of juicy 5's I've found that I will also need to replace the two little orings that go on the banjo bolt. I've looked online but can only find these as part of a caliper servcie kit costing £30. The LBS says they can only get them in as whole kits too.

Any ideas? I know you can get orings of all sorts from oring suppliers - anyone know what size, material and hardness these orings are?

Posted : 05/01/2010 6:04 pm

gusamc

Posts: 0

Free Member

due to an ebay picture size misinterpretaion and a leaking tap I have a set of a wide range of small (1-8 mm) mixed o rings.

Already fixed up somebody on here with one

If you can email (profile) me with inner, outer, diameter (of rubber) measurements I can pop some on the post.

Posted : 05/01/2010 6:31 pm

davy-g

Posts: 537

Free Member

try here http://www.fisheroutdoor.co.uk//find.asp?category=&part_no=&find_category=140&find_description=&find_part_desc=&brand=310

and use the Advanced search option... 😉

Posted : 05/01/2010 7:04 pm

clanton

Posts: 0

Free Member

Topic starter

Thanks for the replies. Email sent.

Posted : 05/01/2010 7:26 pm

Forum menu

[Closed] Avid Juicy 5 Banjo Orings