So, if i was to buy a Pro 2 EVO Freehub Body - SRAM XX1-XD QR and fit my X12 endcaps it'll work right??
Or do I [b]need[/b] a Pro 2 EVO Freehub Body - SRAM XX1-XD X12
Having a moment after stripping down what I thought was a simple bearing job for a buddy 🙄 His entire freehub, cassette, hub bearings and axel are trashed 😯
Cheers
To answer my own question, YES essentially they are the same and fit the axle etc...
However, the ones with a black seal seem to be for the Pro2 Evo's and the ones with the GREEN seal for the Pro 4's. The seal size is slightly different, as I found out last night. Old green seal fits the new freehub though, so all good and a new Green seal is on its way FOC from SJS Cycles
I think its also defined by Gold freehub having black seals and Silver freehub having green seals
Also, the endcaps are turned down a bit so they can fit through the XD cassette "lockring" after tightening.
+1 I had to turn down my Shimano-freehub endcaps to fit the XD freehub, as they were too fat.
