Forum menu
Anyone still do 25....
 

[Closed] Anyone still do 25.4mm clamp risers?

Posts: 1891
Full Member
Topic starter
 
[#4139857]

Fancy trying some different bars with a bit more width/rise than my old Race Face ones. Not finding many around with a 25.4mm clamp, it's all 31.8mm. Any suggestions? Bontrager still do some, but they're narrower than what I've got.


 
Posted : 07/07/2012 3:07 pm
Posts: 0
Free Member
 

Got 3 sets of Race Face 25.4 Diabolus bars - 715 wide, if interested?
£18 each posted


 
Posted : 07/07/2012 3:28 pm
Posts: 5061
Full Member
 

CRC had some for £13 a while back. Funn I think.
Not on there now. Try this
http://www.chainreactioncycles.com/Models.aspx?ModelID=35279


 
Posted : 07/07/2012 3:29 pm
Posts: 21643
Full Member
 

The wider you go, the more flexible bars become. To counter this, they make them a larger diameter in the centre. 25.4 tend to top out around 680mm (except the likes of those listed above). Easton limit their 31.8 bars to 750mm and to go wider, they're talking about 35mm diameter bars (although I reckon this would actually be 34.9 as it's a conversion from imperial)


 
Posted : 07/07/2012 3:30 pm
Posts: 1891
Full Member
Topic starter
 

Cheers for the pointers. Googling and finding a few now. Funn, Easton, On-One do all sorts, almost cheap enough to buy a couple to try 🙂 Just fancy a change.


 
Posted : 07/07/2012 4:45 pm
Posts: 0
Free Member
 

Sunline v3 is 711mm 25.4mm clamp and cheapish. Got some on my HT.


 
Posted : 07/07/2012 6:22 pm