[Closed] Any rockshox gurus out there?

Find the spare parts catalogue on the sram site and check the part numbers of the respective dampers. I suspect it will work assuming stanchion size is the same

In my experience it probably won't be - I tried swapping a remote RLT damper from same year reba to revs & the stanchion thickness of the revs must be slightly thicker so the reba damper wouldn't fit in the revs forks whereas the revs damper was a sloppy (ooer) fit in the reba forks.

Edit - depends how old, it its 2006-2009 era you will prob be fine, later & you'll have same problems as me above

Thanks. Something that i didnt realise.

Suppose there's 2 questions, will it physically fit, and will it work well- oil levels and that might be different. But you can see if it fits by seeing if it fits 😉

Year of both forks?

Both forks are 2012

From the spare parts catalogue ( https://sram-cdn-pull-zone-gsdesign.netdna-ssl.com/cdn/farfuture/QXO-7yvHRMSbuNn0y3Al5HftmjvfJAVC1JPJoI9ra5M/mtime:1372788171/sites/default/files/techdocs/2012_rockshox_spc_rev_c.pdf)

11.4015.544.[b]050[/b] Compression Damper, Crown Adjust, Motion Control DNA (includes comp and floodgate knobs)
2012 SID RLT (120mm only)

11.4015.544.[b]110[/b] Compression Damper, Motion Control DNA, Crown Adjust - 2012 Revelation RLT (includes compression knob)

So it's a different part number at least.

Thanks for that lil bit more in the know now

If they're (the compression dampers) are the same length it should work fine, as long as top cap threads are the same (not got a pair to hand to double check)