[Closed] Alpkit stem cell and jet oil.

Not sure of the diameter of a jetboil but an Alpkit 650 Mytimug [b]just[/b] fits and I think that's 100mm diameter. You might want to check the height as well - if the jetboil is too tall/topheavy then you'll have fun.

I thought this was going to be about stain removal. Disappointed.

Diameter may be an issue. Why top heavy ab issue?

The stem cells aren't particularly deep so if the jetboil sticks too far above the top of the bag then it has the increased possibility of falling out.

Mine takes a standard 500ml bottle, with only the drinking spout poking out.

also look at others - Revelate stuff (sadly the website is throwing SSL errors...) Gas Tank but looks like there's a new one on its way.. "Mag Tank"..

Don't think so - I have Jetboil Zip and Stem Cells but never tried it as the Jetboil is too big.

I was trying to figure out the same thing last year. Lots of suggestions all of which meant spending loads of cash. In the end I carefully bent a wire bottle cage into shape to mount my jetboil on the seat tube. I strap a velcro band around to stop it making a bid for freedom on rocky sections.

Works very well.

There's a new Stem Cell XL version, which is a bit bigger.

There's a new Stem Cell XL version, which is a bit bigger.

New XL Stem Cell can take 125mm diameter, I think a Jetboil is 104mm.

You might be better off with some Gorilla Clips and popping it on your forks or under your down tube.

My brukit jackal fits in a stem cell xl easy enough. Jetboil probably would as well?

What a let down, I was hoping this was some sort of 90's pubescent fantasy thead...

[img] [/img]

With the stem cell being used to transport:

[img] [/img]

I is disappoints...