[Closed] 730mm XC handlebars?

Which 700 flats come in at 180gms? That's carbon light I take it? Think salsa do some around the size you're after?

if you'd trust a set of sub 300g 730mm wide bars you're a braver man than I

sunline v1 flat bar?

Raceface sixc,ragley wiser,Easton haven.

Unless it's a carbon bar, you are going to be hard pushed to find a flat bar of 700mm length for 180grams (even going for standard size instead of oversized bars will be pushing it)...

[url= http://www.winstanleysbikes.co.uk/product/23613/Truvativ_Stylo_World_Cup_Single_Speed_MTB_Flat_Bar ]Truvative single speed bars - 700mm and 180g[/url]

Just buy the Truvatives at that price.

I've a pair of Easton DH carbons, 220g and 711mm.

Yea, but I've got 680mm bars at the moment and keep holding them right on the end, just cant find any XC bars that are wider than 700mm (without spending a fortune on carbon).

nuke proof bars weigh 260-ish grams.

i've weighed 'em.

chop a bit off = 250g.

and they're very, very strong.

if you're flexible on the flat/riser thing, the ragley wiser bars might be worth a look?

i find the claimed weight of those truvative bars a little optimistic TBH - monkeylites at 685 come in at 155gm (and mine weighed a few grams more actual weight) - so an aly bar that's wider is gonna be hard pushed for another 30 gms

"I've got 680mm bars at the moment and keep holding them right on the end"

Me too. Is this a problem?

I cut my (685mm) bars down by 3/4" each end and ride with my hands hanging over the edge of each lock on collar (prefer it that way).
there are loads of 710mm bars around 300g (711mm is wide enough for me on the DH bike).

Liking my carbon RF sixC bars @ 730mm.

I've got the Truvativ Stylo flat bar. Was nice but I had to chop 30mm off either end. Still wide but the bar ends feel comfier.

i run raceface atlas bars. good weight, strong, 725mm. love it.