Topic starter
Just building up a 456 for the missus and using a spare Shimano HT2 bottom bracket. Can anyone tell me how many spacers I need? I'm guessing 2 drive side, 1 non drive?
Thanks in advance
Posted : 17/06/2011 2:36 pm
You're only right you know.
Posted : 17/06/2011 2:37 pm
YUP 🙂
Posted : 17/06/2011 2:43 pm
as long as you are talking about the 2.5mm spacers 😀 (XT BBs can come with some smaller ones too)
Posted : 17/06/2011 3:04 pm
Does it matter which side they go on i.e. could I put 1 on the drive side and 2 on the non-drive side? The reason I ask is that I'm trying to reduce the chainline.
Posted : 27/09/2011 1:58 pm
i my 1x9 i did 1 on the drive side and two in the no drive side to give slightly better line for the bigger sprockets
Posted : 27/09/2011 2:03 pm
Not sure if it will be the same but I needed two on the drive side and one of the non-drive with my SLX cranks...
Posted : 27/09/2011 2:49 pm
