Forum menu
2.1 rear 2.35 front...
 

[Closed] 2.1 rear 2.35 front? epicon forks

Posts: 0
Free Member
Topic starter
 

I have 2.1 pacestar 2015 nobby nics and considering getting a hans dampf 2.35 26 up the front?

Is the size difference going to cause problems and will the hd actually fit? Its a carrera banshee x 26 with epicon fs.

Thanks
Christian


 
Posted : 24/01/2015 11:21 am
Posts: 43948
Full Member
 

Lots of folk run a wider, usually grippier, front.


 
Posted : 24/01/2015 11:29 am
Posts: 0
Free Member
Topic starter
 

Excellent thanks.

Is it likely i will feel the extra rolling resistence and do you think it would fit?


 
Posted : 25/01/2015 12:12 am
Posts: 43948
Full Member
 

No idea on the forks thing. As regards rolling resistance, there are too many other variables. for instance, you might find you are also running the wider tyre at a different pressure. However, only you can decide where on the grip/resistance axis your best compromise lies.


 
Posted : 25/01/2015 12:16 am
Posts: 0
Free Member
 

I've got Hutchinson Toro (I think) 2.35s on my bike with 2012 Epicons and it's fine.


 
Posted : 25/01/2015 7:18 am
Posts: 1494
Full Member
 

I run an On-One Smorgasbord in my Epicons with a mucky nuts type mud guard. The Smorgasbord is supposed to be 2.25 wide, seams wider than that.


 
Posted : 25/01/2015 12:58 pm
Posts: 0
Free Member
Topic starter
 

Cheers guys.

I know its going to be impossible to say how much harder it will be to pedal but what i dont want to do is swap the front tyre and end up with a bike which feels like it doesnt roll so well again like it did when it was running panaracer xc pro's


 
Posted : 25/01/2015 2:22 pm