Forum menu
160MM PIKES Where f...
 

[Closed] 160MM PIKES Where from

Posts: 4477
Full Member
Topic starter
 
[#7453448]

So on the lookout in the not too distant future for some 160mm pikes. Wheres the go to place to get them cheap these days?


 
Posted : 13/11/2015 11:39 am
 LoCo
Posts: 0
Free Member
 

Wheel size?


 
Posted : 13/11/2015 11:48 am
Posts: 14931
Full Member
 

Ze Germans.


 
Posted : 13/11/2015 11:50 am
 LoCo
Posts: 0
Free Member
 

😉


 
Posted : 13/11/2015 12:09 pm
Posts: 4477
Full Member
Topic starter
 

27.5 although they will be run 26 for the forseable.


 
Posted : 13/11/2015 1:18 pm
Posts: 21643
Full Member
 

Tick.


 
Posted : 13/11/2015 1:19 pm
Posts: 4477
Full Member
Topic starter
 

would take 150mm if they were much cheaper


 
Posted : 13/11/2015 1:21 pm
Posts: 1838
Free Member
 

I bought mine last year from Alltricks for about £320 posted,went for 150 though as another £100 for the 160's,eventually swapped out the air shaft and put them to 160 for 25 quid.


 
Posted : 13/11/2015 1:49 pm
 LoCo
Posts: 0
Free Member
 

Drop us a mail


 
Posted : 13/11/2015 1:51 pm
 Euro
Posts: 0
Free Member
 

Drop us a mail

All of us??? But i don't have any for sale 😛


 
Posted : 13/11/2015 2:13 pm
 LoCo
Posts: 0
Free Member
 

All of us???

Yep I'm lonely 😥


 
Posted : 13/11/2015 2:14 pm
 LoCo
Posts: 0
Free Member
 

On another note whether you're buying from us or elsewhere, you really want to go for the 2016 Pikes as they have had a few design changes, most notably the redesign of the damper sealhead and seals which will improve reliability.


 
Posted : 13/11/2015 3:59 pm
Posts: 0
Free Member
 

the grey bottomless tokens are different too. They're a little narrower to allow for air to move past the sides for some reason.


 
Posted : 13/11/2015 4:12 pm
Posts: 14169
Full Member
 

the grey bottomless tokens are different too. They're a little narrower to allow for air to move past the sides for some reason.

I think they're just that size to fit the Lyriks (which have thicker stanchion walls).


 
Posted : 13/11/2015 4:16 pm
 LoCo
Posts: 0
Free Member
 

Red ones are faster though 😉


 
Posted : 13/11/2015 4:17 pm
Posts: 0
Free Member
 

Along with the seal head is a new extended rebound shaft/rebound piston mount. The Extended rod is no longer undersized from the rod so it slides in the seal head bushing, its triangulated so it stops above the bushing.


 
Posted : 13/11/2015 4:39 pm
Posts: 21643
Full Member
 

How do you tell them apart? Are the 2016 the ones with the decals applied at an angle?


 
Posted : 14/11/2015 6:49 pm
Posts: 1352
Free Member
 

How do you tell them apart? Are the 2016 the ones with the decals applied at an angle?

You check the serial number. Ones with 2016 decals are not guaranteed to be 2016 model year forks.


 
Posted : 14/11/2015 7:30 pm