Forum menu
12 X 135 stealth re...
 

[Closed] 12 X 135 stealth rear axle - does it exist?

Posts: 0
Free Member
Topic starter
 
[#10431581]

The old Maxle rear axle has finally cracked and I need to replace it. I'm thinking it doesn't really need to be quick release so a "stealth" version would be fine and probably last longer. But I can't seem to find one, can find ones for 142mm and 148mm rears, but cannot seem to find one for an older 135mm rear end. Has anyone stumbled upon one of these anywhere?


 
Posted : 10/01/2019 11:08 pm
Posts: 16529
Full Member
 

Have you checked Brand X mate, on crc?


 
Posted : 10/01/2019 11:19 pm
 geex
Posts: 0
Free Member
 

Yeah. Brand X ones are decent and reasonably priced. Just fitted one to replace a broken twisty lever OEM one that broke off


 
Posted : 10/01/2019 11:31 pm
Posts: 1299
Free Member
 

Superstar used to do one too. Im sure ive got one knocking about somewhere.


 
Posted : 10/01/2019 11:45 pm
Posts: 0
Free Member
Topic starter
 

I did look on CRC at the Brand X ones, but seemed to be for 142mm and above.


 
Posted : 11/01/2019 8:41 am
Posts: 1754
Full Member
 

Mt Zoom brand on xc racer should be one for around £30


 
Posted : 11/01/2019 8:56 am
Posts: 8890
Full Member
 

Brand X are the best VFM I could find

seemed to be for 142mm

I've never had anything 135mm that wasn't QR or bolted so may I ask a potentially stupid question? Given that it is a through axle wouldn't 135 or 142 be much the same? Don't you just need to know the length and thread pitch?


 
Posted : 11/01/2019 1:07 pm
Posts: 0
Free Member
 

A couple available on r2-bike.de (from Shift up and Cruel components), but quite expensive. Wolf Tooth do a 167mm long one, which seems to be the correct length, for less, but can't find them anywhere else than on their site.


 
Posted : 11/01/2019 1:23 pm
Posts: 953
Free Member
 

BETD/Goldtech make one in 135mm


 
Posted : 11/01/2019 1:38 pm
 geex
Posts: 0
Free Member
 

Sorry. 135mm.
Dartmoor bikes do one


 
Posted : 11/01/2019 1:43 pm
Posts: 0
Free Member
Topic starter
 

Only 12 X 142 and 148 on XC racer. The BETD one seems best price at the moment. Not sure of the head though, can't see if it's a hex bolt or you need to put something through the hole and twist, can't tell from the photo. Might email to ask the question.


 
Posted : 11/01/2019 5:40 pm