Forum menu
10 speed bar end sh...
 

[Closed] 10 speed bar end shifters for shimano..options?

Posts: 8328
Free Member
Topic starter
 

After a pair for a tt bike I’m putting on the turbo. Shimano ones only seem to come in Duraaace and not particularly cheap. Even microshift cost a small fortune

Are there any cheap options out there I’ve not thought of? Ta


 
Posted : 20/10/2021 10:41 pm
Posts: 337
Free Member
 

Sunrace do some. But not sure if 10speed.


 
Posted : 20/10/2021 10:47 pm
Posts: 1116
Full Member
 

SJS cycles do a good range

I just bought some microshift ones which are excellent, but yes a bit pricey


 
Posted : 20/10/2021 10:56 pm
Posts: 8328
Free Member
Topic starter
 

Sjs did indeed have a good selection, but 90 quid seems steep for a pair, which was about the cheapest on offer.

SRAM second hand may be the way to go


 
Posted : 20/10/2021 11:34 pm
 kilo
Posts: 6920
Free Member
 

Dia compe for sixty quid at spa cycles. Will bodged thumb shifters not work? Or just old school down tube shifters?


 
Posted : 21/10/2021 8:48 am
Posts: 5047
Full Member
Posts: 12524
Full Member
 

Jump on them ^. I've got the 9 speed version that's been around a few bikes (only the RH/rear, 1x) and it's lovely. Light, smooth, positive action. Nowt to go wrong, will last for ages. Currently on a 34 year old audax/randonneur bike, perfectly matched!


 
Posted : 21/10/2021 10:19 am
Posts: 12524
Full Member
 

SRAM second hand may be the way to go

I've got SRAM TT500 10 speed that's on the CX-type bike. It replaced the Dura Ace as I wanted a clutch mech, and SRAM was the easiest way of getting there without jigging about with pull ratios

It's a much stiffer, heavier, clunkier action. Some of that's down to the clutch mech, but the difference is still obvious before attaching cable to mech. It's fine, you get used to it, it's stayed on there for 6/7 years apart from the odd period singlesped. But it's always a pleasure going back to the Dura-Ace


 
Posted : 21/10/2021 10:26 am
Posts: 12942
Free Member
 

Old 8 speed with the indexing turned off.

Infinite trimming too.


 
Posted : 21/10/2021 10:33 am
Posts: 8328
Free Member
Topic starter
 

@martymac..

Great shout, cheers!


 
Posted : 21/10/2021 10:41 am
Posts: 5047
Full Member
 

Literally the first pair on ebay 😂😂👍


 
Posted : 21/10/2021 11:25 am
Posts: 2320
Free Member
 

microshift can be had cheaper

https://www.aliexpress.com/item/1005001872670569.html


 
Posted : 21/10/2021 11:40 am
Posts: 17329
Full Member
 

Might had an old set of DA in the spares bin. I forget if they are 9 or 10 speed. I went to Di2 10 speed.


 
Posted : 21/10/2021 11:49 am
Posts: 2425
Free Member
 

Might have the perfect set up for you
DA bar ends
Profile bars
10 sp 105

Pm me if interested


 
Posted : 21/10/2021 8:40 pm