So I see these retail at £140 a pop, linky which isn’t too cheap if you ask me.
Anywho, I thought I’d do a production run on the ole CNC mill.

I reckon I can make a few for substantially less than the RRP.
Anyone interested in getting a spare mech hanger?

Possibly interested if cheap 🙂

both or a RH?

RH

Interested in both , could you set them up like these guys ?

http://powellprecision.com/

Ooh they look good. The lower bb may not be too desirable though.

clive: if I did I’d be more inclined to do a 150mm longer wheelbase 2Deg slacker.
Reason: works for 650b wheels and your dropouts are already adjustable to 1.5 degrees.

The 2 degree slacker dropout then gives you extra adjustability over the standard variation.

thoughts?

I might be interested too.

Linkey

G3 dropouts in fact RRP for £42.99 each.

Thought extra could have done a misprint with the uzzi parts

But the 951 costs are the same

http://www.extrauk.co.uk/product/detail/Intense/Frame_Spares/2475/

Does anyone have a contact number for extra ?

That price from Extra is correct. Apparently they had a big drop in spares prices last year.

Ask over at SDH / PinkBike, you may get more interest

I would be very interested. would you be able to do one for 135mm spacing for a 10mm axle? extra only do thm for 12mm axles i see and you need to get a shim for the axles if your going to use 10mm axle.

let me know how much it would cost

I’d be interested too, I’m looking at buying a Socom but the frame will have a 150mm spacing. I’ve 135mm wheelsets and would rather spend the money on getting new dropouts than another wheel. I know this thread is five months old now, but any news on doing a run?

I have a medium Socom for sale if you are interested Bluechair84.

Email in profile

Thanks for the offer Dave, I picked up a small already. I’m just looking for the dropouts now! I’m guessing this thread is dead in the water as no response from the OP for a while.