As title. Can you space down 150/120mm revs to 140/110 with a 10mm spacer?
Bike Forum
Can you space 150 dual position revs to 140?
-
Posted 6 months ago #
-
For the sake of 10mm I doubt it's worth it tbh.
Posted 6 months ago # -
No but just put 10psi more in the - than the + chamber and it'll suck them down the 10mm your after
Posted 6 months ago # -
Cheers
Posted 6 months ago # -
Whyte1 - Member
No but just put 10psi more in the - than the + chamber and it'll suck them down the 10mm your afterDual Position Revs are solo air so that won't work. Just run them as is difference will be minimal
Posted 6 months ago # -
craigxxl - I were going to say that
they come supplied with plastic spacers though so I'm guessing they can be adjusted..
Posted 6 months ago # -
They usually come with a couple of 10mm spacers to insert in the air spring: whatever size spacer you add reduces travel and ride height by that much. Lots of instructions on web and on the SRAM site. I've found 15mm plastic plumbers pipe works a treat: just drill a couple of 2mm holes in it for air flow.
Dave
Posted 6 months ago # -
Appardntly its easy to nktice 10mm
Posted 6 months ago # -
Appardntly its easy to nktice 10mm
It is when you only have 10mm to start with, you should know.
Posted 6 months ago # -
Aww bless.
Posted 6 months ago #
Reply
You must log in to post.
