Viewing 6 posts - 1 through 6 (of 6 total)
  • adapter needed
  • ben10
    Free Member

    hi all im after a adapter so i can fit my lefty fork to a 1 1/8 head set as im looking in to bilding a hardtail out or my bike dose anyone know were i can get one or have one for sale

    midlifecrashes
    Full Member

    Pretty sure it can’t be done. Your lefty just won’t go into the tube with room for a bearing(if at all). Your other approach is to find a hardtail frame with fat headtube, try here:

    http://singletrackworld.com/forum/topic/is-there-a-hardtail-with-a-15inch-headtube

    chugg08
    Full Member

    You can use the Lefty for all 1 1/8 steerer
    http://qwertycycles.co.uk/products/lefty-4-all-11-8-steerer

    khani
    Free Member

    Or try These…

    d45yth
    Free Member

    midlifecrashes – Member

    Pretty sure it can’t be done. Your lefty just won’t go into the tube with room for a bearing(if at all).
    Why bother commenting on something you know nothing about?
    Ben – For it to work, the length of your headtube + headset must be less than 137mm.
    Have a look at this link (here on STW).

    LLOYDSTEVENS
    Free Member

    Lloyd from QwertyCycles.co.uk here, Lefty 4 All steerers due back in stock early next week. Use STW10 to get 10% off your next purchase.

    If you are looking at getting a Lefty 4 All steerer make sure your Lefty will take one, on some of the older Leftys you can not remove the steertube. They are actually riveted to the lower crown. If in any doubt post a picture.

Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘adapter needed’ is closed to new replies.