Ti29er
Ya it is quite long.. pic angle prob makes it look longer… 400mm seatpost n far bit still in frame 😉

changed at bit from this but here we go 😉

I've used brasso.. did the job nicely!

Been riding santa cruz bikes for over fifteen years… superlight is the best one yet 😉
welcome to the club haha..

Yes to both headset and bb….

Chris King headset eating steerers……
What you doing to them…?

Had several bikes with CK headset's and never had this scoring several have mentioned about?

First pic I think is not far from the upper star post??… still learning the area 😉

Tyres… still using my racing ralphs and ya riding with gears… not that I changed gear that much….

CG – It could have been us… there was 3 of us but 2 were always at the front 😉 lots of fun in the think snow 😉

yellow brick road today too

Great fun today at Swinley forest… car park still closed but parked across the way… very deep snow in places and only just rideable…. 4×4 track in the snow help as packed down 😉

Have heard the car park was closed yesterday due to branches snapping due to snow… heading over there in the morning for a blast 😉

sure will find somewhere to park if car park shut still

Fizik Gobi XM here…

Got a King BB, no creaks, roughness, locking up, changing every 5 mins… smooth as a babies bottom still…

Highly recommend… big cost at first but will last for ages!

I recognize that fella 😉

Haha.. I rode on the road bike into london that day last year…. lots of fun 😉

def get the mtb out….

just built my dad's bike up for him over christmas…. just awaiting adaptor for the front brake 😉

my HT on a smaller budget 😉

Merlin cycles are very good for sorting out ordering rotors for me 😉

I do have a 140mm lightweight rotor if you still need one? fitted but not used.

Very funny 😉

Rapid rise is a joy.. embrace 😉

I'm guessing your saying you go to shift but nothing happens? start at the smallest cog at the back shift once.. adjust barrow at the shifter until it has sat nicely in the next gear up.. rest should work fine….

ya drop image (face) over bauble image… multiply image… select face.. sphere:

select marquees (4) on the tool bar and select elliptical marquee tool
(creates a circle… hold shift to keep a true circle…)

you can also select a circle around face then go to filter > distort > sphere for a quick effect….

you can repeat effect again and again to your liking..

Superlight every time for me…

squirt lube… stays clean and never sounds dry 😉

http://www.in2dust.co.uk/

Reba teams 09… perfect.

Sid's are lighter but on-one were doing a great deal on the reba team I had to get…

def recommend the reba!

Ah ya had same problem..

Seized that bad was turning the cranks on the inner of the bottom bracket rather than the bb turning..

lasted about a month… tried once.. never again ;-/

Hang in there everyone…

I snapped my achilles in april.. plaster for 3 months, told a year before cycling etc again..

Happy to say back on the bike already.. the feeling is very sweet 😉

I would get some rockshox world cups instead…

Had same problem.. Had to get a new caliper 160 so I could run a 180 rotor again

Cheers z1ppy.. will give them a buzz

I'm 5'10.. have fairly long legs..

Cheers Neil 😉

XTR cranks every time 😉

njee20 – cheers…

A guy from the specialized concept shop was selling just the frame with no forks for a price I couldn't refuse… reason it only cost just under £1300 to build 😉 reba are doing the job nicely.

just built an s works and loving it… sure the comp rides very similar..

go on then.. just built 😉

boxelder…

frame came from a specialized concept shop off one of there riders.. brand new and very very good price 😉

all in for 1300 with frame…

Thank you.. your rear mech does the trick nicely 😉

Ya the tyres I use for racing in summer.. were put on just to try outside 😉

Davey_clayton..

gears, shifters, handlebars, brakes, rims, seatpost, stem all classified

cranks, grips, pedals, chain ebay.. already had the hubs, cass and saddle..

forks, barends the only shop buy

just under £1300 spent!