The seller has asked me to accept his cancel transaction request. I’ve left him negative feedback so I don’t see the reason why I have to accept. Is it so he doesn’t pay eBay the fees?

I don’t think Hope are all that light.

I haven’t seen one within my budget

Ford F150 Lightning pickup or the dodge pickup with the corvette engine…the srt 10 . Sub 5 second 0 – 60.

Quick links, £ notes…

I have the type 2 rear mech. About 8 months old.

This is mine…work in progress. Frame-work is mostly treated 2×4. Imho I don’t think decking will look right on the outside as a cladding…

I’ve a M24 long shank one of these through the floor on the inside which I attach the bikes to.

I’ve had a 2014 Comp model for around 8 months and think it’s actually pretty darn good after getting the ride position sorted..ie swapped the oem bars for Renthal 30mm rise carbon bars. Changed the brakes to XT and the front tyre to a 2.4 Ardent when it’s dry but a 2.4 Magic Mary Trailstar at the moment ( fantastic tyre ). I’m running it 1dip with a 42 range expander on the rear. It loves to be pointed down and I’ve ridden it at the Ardrock enduro last year, Cwmcarn, BPW, Nant y Arian, Llandegla, Aston hill, FoD, Swinley Forest, recently the Climachx trail and the Antifreeze event at Coed y Brenin. Takes it all in its stride & It suits my riding. Don’t think you’ll be disappointed.

Breninbeener..not that troubled really..

Don’t know where the line is/was…it was something we did as part of a loop at Climachx. Uploaded the loop and Strava does the rest and sorts the segments out.
As for minding, I’d rather be in the top 10 than the last 60…I’ll take what I can at my age..\o/

I did the same at a parking place with a metal height restricting barrier. The whole roof-rack slid off of the car and landed right side up with 3 bmx race cruisers still in position.

The Long Mynd isn’t too far away..

You’ll be fine, session a few different runs then head over to Aspley woods.

Happens to me also but only on this forum..

@lemonysam…I’ve not collected the parts yet. I’ve not even seen them.

@cougar…should I quote this in an email to them?

Shirley I should of been made aware of a no returns policy?

Cwmcarn, BPW, Cwm Rhaeader, Nant Y Arian, Penmachno, Llandegla.

Favorite – Penmachno

Least favorites – Llandegla & Nant

As per dannyh…Glasgow kiss then knee-caps with Bombers.

I’d say something and make sure he knows I d be none to happy if he clipped me with his mirror..

@ thisisnotaspoon- nice contribution.

Yes they might be campaign shores but there are genuine, important things that I’d be none the wiser too if it wasn’t for them. They are big in campaigning for mp’s expenses not to be hidden, saving the NHS and protecting our trade laws and personal data from oversees..

You’ll be fine. Knee pads, helmet & gloves as a minimum though, just in case..

Did you try the Facebook page?

Go on to the DyFi Facebook page as there were people advertising some on there.

What group would you be in? I’m in male 50 ~ 59, my son 18 ~ 39

Or a closer to home road trip…..
Wales
Lakes
Dales
Scotland

@ samunkim…50 in August also.

Maybe…a group of us ’50 of 2015′ need a week of uplift assisted shenanigans.

Finale Ligure anyone?? Mountains to beach…

I’m in..

Does a 203mm rotor slow down a 40lb dh bike quicker than a 180mm does a 28lb enduro bike?

I don’t think it has a removable spider. Rings were 22/33 As standard on my 2014 Enduro.

It’s more economical to (1) go downhill in neutral, foot off the gas than (2)in gear foot off the gas.
Look at the rev counter… (1) approx 850rpm compared to whatever it is when your in gear using the engine…

Blackspire go down as low as 26.

linky
AFAIK 30t is the lowest you can go with a 104bcd

Anyone??

Wow so many? Thanks. Google search turned a blank.

Shopping at Dunhelm Mill.

Sadly 265 70 15s needed, but £87 a corner from the above site. Cheers all.

I seem to be looking at around £100 a corner…Is that right?

It doesn’t seem logical as applying the brake would centralize the pads and they would work as normal. Post bleed they weren’t good, I thought that I maybe got fluid on them so bought new pads, removed the wheel and cleaned the rotor. When I went to fit the new pads I noticed the caliper was loose. If I put the old pads back in and they are contaminated I’ll have to clean the rotor again..it’s no biggie but just can’t be doing with the faff.

Is it worth buying online and getting the local depot to fit or are they not happy fitting tyres they haven’t sold? What can I expect to pay per tyre to fit? ( I can expect they don’t get rid of the old tyres).

By best I don’t mean cheapest as there seem to be longevity issues with the cheap ones.

I might be interested in a used one depending on the deal. ( email is in my profile ).

It’s nothing like unobtanium.

Videos, files, evidence etc gone missing..there’s a surprise. ..same sh1t different day, do I have confidence in the government to see that nothing else goes missing and that a full investigation, leading to the arrests and trials of all involved no matter how high up it goes?? Most Definately not.

There is a UK office.

AgeRenew Skin Care
RMA: 3XXXXXXXXXXXXXXXX05
P.O. Box 17453
Edinburgh
EH12 1LD
UK

If you have any further questions, please respond to this email or call us at:
UK Freephone 0800 249 4323
UK Local Phone 020 7442 5849

& OH says she saw an advert somewhere, clicked on the link and here we are.

@ chewk- apparently it was free trial period..which lasted 14 days,