yes charged it up then first time on it booted and she started to add her details. got her details in and switched it off .

hour later tried to switch it on and only got the kindlefire logo which stayed on and that was the end of her Kindle experience .

tried the internet which came back with a hard reboot of holding the on button in for 20 seconds. but to no avail

Walked the dog down to the butchers to collect a piece of cow
wifes working

just off out to collect Freddy the newish grandson and going to be looking after him for the first time
just a bit nervous
then vaccuming and cleaning for when mrs T comes home
so probably be knackerd by tea time .

Come on JoeG get the bloody camera going we want pics too please :wink:

MM never thought about when you dim them and go back to the normal dipped beam
the lights on the T5 are pretty crap .

no problem putting an isolating switch in there

I keep talking myself out of wanting one but then these threads come along and get the wanting nerve all a jangle again

Just dig up the old stash :wink:

Isn’t measuring lights by power in a bit out of date

This is then the beamshot from a 30 watt light by that measure and I want to make 2 of the critters

Cant we turn all those wind turbines to blow and shift the jetstream back into position for sunny.

So where did she go this year cos it certainly was not west Yorkshire

Pretty please Summer come and spend 3 months in Yorkshire next year

8.4v is the max for 2 series LI ION`s so I wouldnt use the 9 volt for 8.4 battery packs
thought if its a good design it will have an overcharge protection circuit built in .

dont put on charge and then go to bed

Yep agree some made me cringe
most are a good reason to not try jumping on a bike

Nice blaze going tonight to ward off the damp shitty weather

to get 1700 lumens from 3 xmls need a drive current of around 1500 ma
to check would mean putting a meter in line to see what amps the battery was giving .

it looks like the same setup as my Dominator so 2.5 hours is doable but I doubt it is a true 1700 lupins .

is it a 14.8 volt pack

Can get three hours from the 3 led version no problems

About 40 mph on the leeds liverpool canal at gargrave. testing out a new 70 hp Yamaha outboard on the skiboat .
seemed like 90 between the banks .

LOL thats what I like being able to annoy my mates from far behind.

Little vid showing it on the road this morning .
http://youtu.be/Iy3Vvd-zQ94

and what it looks like if coming the other way not a roady light at all .

Plums
no its not altar lane. but I could probably still wake the kids as on the hill at silsden
so could nearly hit Ridds from here.

@Paulmgreen
Its a fairly easy build and will post the bits when I get some more but better leds in .
and do the Mark 2 as have ideas on making it better.

Love tubs

Cheers been pretty busy in the day job so not had much time for tinkering .
put a light under the stem and get dazzled from flash back off the cables.
put em nearmthe wheel and get huge misleading shadows .
better off with a difused light from higher up say under the front of your bar
ight .

Yes Brightness does act similar
the five lad was just an experiment the blue light on the bike is only 3 leds as removed 2 as the five was too hard to find a driver for using a 15 volt battery it would need an 18 volt job

here is the beam shot from the 3 led and 3100 on paper lupins .

and hopefully a comparison of the 2 me I like the 3 led over the 5 led

Burntime on full a staggering 40 mins with a 4.4 amp hour battery .

Should really have it on the back for a photon drive unit.

its only 70 mm dia

What are these things you calle presents :cry:

Nah its not cold yet wait till the Geordies put a coat on

That is fantastic Porter_Jamie any chance of a pic of your machine too

I am in the process of making my bar light for the bike not done yet but have got the beamshot it will produce over 200 metres to the van
and only 3 leds

Lots of ideas here

secret santa stuff here

Bloody hell

Piece of innertube works as a quick fix just need to experiment with the size for the optimum grip

Now you have your sexuals sorted
what van you getting

yes

whoo we might just get a race with Lewis and Seb

the R4 got a new driver board that would let it drive the XPGs to the full 1.5 amps
And a new switch
Parts cost. £25
Labour about 1.5 hours

Not sure on the difference have to get Mugboo to comment on that score.

Turn the heating down at work .
You are trying to suppress a natural body function using
Probably toxic chemicals .

Belt and braces approach if the velcro lets go

does it look like this cos its mega secure on my toptube

recent ride on very wet boards at Gisburn and looked deadly but were
surprisingly grippy .

around 1 min in this video nothing rad Sorry .

Yes sure only it will be a new one as the demos never come back .
Drop me a mail.

They are totally different animals
The fullbeam is a bar flood and the spider a helmet thrower with a. Localised down light in front.

My only experience of a Hope R4 was Mugboo off here had a vision 2 upgraded by me
and he also had an R4 which he requested I make brighter as the vision 2 was drowning it out and he now seems happy with the boosted R4

Does bear a resemblance to the Vision 2

Hopped up Vision

Lumenator

old Vision 2

All on high