Review from AUS https://www.ambmag.com.au/gallery/we-test-the-aldi-premium-29er-mountain-bike-529075

Seems the bike is built up by Polygon

Is there enough room to get a 31.6 dropper in the 30.9 seat tube?

I’ve had wheels, chain rings, eveo nano peddles and some other bits. Never had any issues or problems when contacting them either.

Bird Zero AM

Thin layer here as well. I also turn my bike upside down for a few mins pre ride so the oil in the fork can lube the foam ring and wiper from inside.

Once a week I use WPL forkboost on the stanchions.

Got them on my Bird Zero AM.

The only issue I’ve had is the Trail Boss on the rear likes to get stones/trail clutter stuck in the outer knobs due to the larger size (Wasn’t an issue when running 2.4s) This could be due to where I ride. Normally they come out by themselves, but a few times I’ve puled over to remove it from the knobs.

Now running a rear Proguard to protect the back of my head/back from trail clutter flying up, I also had to tap up my chain stay where it joins my seat tube as large stone flying down on it didn’t do the paint job any good.

Weird reply but being honest.

Tires are ace otherwise. will upload a photo in the morning.

Cheers..

MSC Tires are a UK based company, some of their tires have been reviewed on MBR

Owned by Terraventure. Designed in the UK, unlikely produced here thou..

MSC TIRES

Mine came today also via Hermes..

Nice PSA ordered a grey pair and a cheapo lightweight rain mack with the code

I’m using a Superstar components chain ring on my SLX M7000 with no issue.

Your such a boner for linking that 😀

I got one 3 weeks a go, the included remote is fine, thou due to the way it was packaged the included outter cable was unfit for use (kinked to death) and the inner cable wasn’t much better as it isnt a pre lubed one.

I switched these both out for the left overs inner/outter from the Shimano XT OPTISLICK gear cable set which I used in my bike build, these come pre lubed and now it shifts like a dream.

Kinesis Maxlight X Only one bottle holder thou

View post on imgur.com

Just took a photo of mine, it’s 390mm wide. Slightly less when filled.

Hope this is helpful.

I just noticed Superstarcomponents are producing there own jockey wheels as well. 5 week wait thou..