not sure when i will go out exactly but good to know roughly so thanks:) as time will be precious i may just have to make do with what is local i.e. upper brailes and the hill – will take another look at the OS

thanks andywill:)

also if i was gonna head to the chilterns where should I go? also anywhere else near by worth going to?

andywill, that sounds great – i am with the rest of the fam so time will be tight so I reckon between 60 and 90mins?:)

hi – i will be in lower brails, but not up until sunday arvo but thanks all the same andy

i will take a look at the OS imp, just wondered if there was anything cheeky about:)

haha brant:)

thanks for the info david, i reckon now i will go half link, put the nuts back on the on-one, and if that still isnt working get a surly too

sweet, cheers

sorry….forgot to ask, with a half link is there a specific one i need or can i get any i.e. are they all the same size?

cheers:)

yea, i have heard those surly’s are good, they seem to be good for long drops, maybe i will get one of those

thanks for the replys. i was thinking of a half link as an option or maybe new tugs so may go with both as then will have a bit more flexibilty.

am i right in thinking i cannot ust stick a solid axle as they are are wider and so wont go through my fulcrum hub or is that bull? i must say i have a solid axle on my s/s road bike and that never slips!

sorry that was a c**p description, I will post a pic, but in the mean time – the on one tug has two bolts each with a nut on (presumably to stop it undoing itself) however, I have to take these off or there is not enough length in the bolt to stretch the chain out enough (as here http://www.on-one.co.uk/i/q/FSOOCT/on-one-chaintug)

cool, cheers i will investigate and install – i take it they are pretty universal in fitting?

ya a new inbred, i will check the on-one one out, cheers!:)

is there a specific type i need to get?

this work???

[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]

yes that is it, sounds like firestarter u can use it all but nuke and i can only put the main 6 bolt bit on, i cant ut the little ‘spread’ plate on as it isnt wide enough and the black lock bit also wont go on

will try out thanks guys

cool thanks nuke, if it works for you i should be ok!!!! will try it:)

according to the packet it goes:

-put on adapter
-put on rotor
-put on spreader plate
-put in bolts
-insert lock ring and tighten

however, on the hub i can do the first two bits but then the spreader plate isnt wide enough and the lock ring wont go on as there is nothing for it to go on to?

either this isnt the right kit or i need to do something i am not. i looked at normal shimano hubs and the fulcrum ones are not the same

would a pic help?

are they all compitable? e.g. the one on ebay in that list is alot cheaper but would there be any issues?