Had a similar issue today. Riding on a windy road with double white lines in the centre going as quick as possible. The car behind was good and waited until dashes lines started again. I then signal right, car behind seemed to stay where it was so moved over. Then he went to overtake on a chevron section. I gestured to him but he kept coming then pushed me over. He was laughing and went off. Tempted to chase him down to traffic lights. He was in 60s too

Meguiars if I can be really bothered but normally spray it with gt85 to disperse water and pretend that its shedding the mud off

Spending Christmas with a mate. Decided to try whisky again after previous efforts. Gone for Glenmorangie, now worried by jools’ comment

Easy to find the trails as said. Well worth a visit

Thanks for that. Made the last hour or so worth while…

It’s up at 50psi and is rock solid. bead hasn’t ipnged into place but it is sitting even all the way around If I deflate is a 1-2mm away from the side of the rim. Will go and do a local loop on it tomorrow if it stays inflated,

Used a hell of a lot of fairy!! Gone up to 50 although the rim says 45max. Tried low pressure and tweaking it. Will try again shortly and see if I can do something.

I remember this topic from last year! Thanks for digging it up, got Summer as the background now. Having like at the weather forecast for the next week Summer still seems like a very long way away

Entering the two Dyfi Enduro events so although not long they’re demanding. Got a couple of 12hr events planned and the SDW if time and weather permit

Enjoyed the STW. Ride in Winchester last year.

Did an order earlier. Took a while to get it but then it worked just fine. Always been a bit intermittent for me

Done a fair few Guillows models. Only got one left which is a big glider. Had a spitfire one last Christmas while suffering with flu. They were precut and quite easy. Nephew stepped on it before it flew

I used to lightly sand the surface or put some dirt on the discs. Now I just ride

Madness – House of Fun

I quite like taking it out 20mins before the end. lightly scoring the surface and drizzling over honey and mustard glaze

Whereisthurso – 6-10k? Even for full Revit that is OTT.

My mrs and her house mate made hundreds a week selling clothing on eBay during uni. They do it occasionally now but postage prices, eBay fees, PayPal fees etc have all taken their toll

Did you post this a few months ago too? I would get a LBS to give a written quotation for repair and pics but perhaps legal advice would be an idea unless you’re already doing that

We’re updating now and going to REVIT LT. Comes with AutoCAD LT and its about 1700

there was a lot of cycling on the Aljezeera channel last week.

If anything like Australia I very much doubt it as it’s considered a weapon

I like CRC and have said that several times recently but I ordered wheels last Christmas on next day and had nothing but problems. They arrived some 2 weeks later and I had a refund.

there are a few sellers on here that I ‘trust’ as they have been contributors on here for years and don’t see them goign any time soon so with those I don’t mind. Any others will get normal paypal and I’ll sort it so I add on the difference. Not worth taking chances

I still play ours occasionally. Can get lovefilm on it although quality of films varies.

It’s one of the circuits on a board that’s heating up and expanding the circuit thus breaking it. You any good with soldering? If so then have a look on you tube as my mate had exactly the same problem and you have use an insulated screw driver [ie insulating tape on end] and put mild pressure on the circuit boards to find out where the issue is. When you put pressure on it the circuit should rejoin and the image should come back. I’ll get him to send over the you-tube link.
As he’s a bit cack handed and it was his games room telly he just moved his desk fan in and put it pointing towards the back of the telly to keep it cool!

I do tend to wear a jumper under my shirt

Not done that in years

I do have some vests. I went through a stage of liking them with shorts until I saw a photo of myself in that get up. Don’t wear them under a short just like I don’t wear long johns!

Loving the Spitfires and GT6’s – used to refurb them with my old man years ago. The mk2 escort is a beautiful car. Wouldn’t say no to a Mexico

You been playing around with transparency? I tend to use the 31 hatch pattern on a fine pen setting and perhaps a bit of transparency. Works better than applying a transparent grey or black

Other than when they got hacked I’ve never had any issues with CRC. Delivery has alway been pretty good and they’re ability to deal with warranties and faults has been great.

Got a captain up front which will be fine and a mud x on the rear. Got no choice in the matter really as found I have the start of a split in the sidewall of the FastTrak :(

Was going to put on a summer tyre but chickened out last minute

Day to day cleaning only happens for the first week or two of owning a new bike doesn’t it?! Bikes get cleaned on the weekend. Mid week the chain will get Gt85 sprayed on it so it doesn’t rust. Jobsagoodun

Good luck to you all tomorrow. Hoping it shorts weather but I’m not holding my breath

600mm is a minimum (typical width) but all 650mm or safety unless you have some American type fridge freezer type of thing

Jesus. You could blind a few lorries with that bad boy.

I have the mbrmagazine / Wiggle neoprene case and its awesome. Protects phone, water resistant, keeps it warm when out riding in the cold.

Yes please

They require Photo ID on race day too

Currently drinking some SIS Recovery Drink!

Yes indeed. Hammering down all day in POmpey. Was up that direction and was nowhere near as bad. Apparenty there’s mud but the course is running well. We’ll see…