Yes will run fine. Run it straight down past the shock & through the hole at the bb. You’ll need to cable tie it to one side to stop it rubbing the shock though. Just cable tie it up the down tube to one of the other cables. Works nice & neat.
Hi Womble,
Just stumbled across this. I currently have a 2013 Foxy XR, I had a 2011 RR before that. I also own a Summum so I have quite a bit of experience with Mondrakers including the Forward Geometry.
My 2011 Foxy RR has cracked on the drive side in 3 places around the shock area. I’ve always had issues withe the pivot bolt on that side behind the chainrings working loose. I’m guessing that’s is the root cause.
I’m hoping its not bad timing to get a replacement on warranty with 2014 stuff coming out & it all being 650B.
I’ve never been but probably will on the next couple of weeks but I’m not likely to veer off the marked trail. I have no idea what the area is like but I would have thought that by keeping the visitors on the marked trails will improve the off piste stuff. If it survives that is.
